Tag Archives: electric motor gear reducer

China wholesaler Good Quality CE 0.12kw-315kw Y2 Ye2 Series Three Phase Asynchronous for Water Pump, Air Compressor, Gear Reducer Fan Blower AC Induction Electric Motor with Best Sales

Product Description

Good quality CE 0.12kw-315kw Y2 YE2 Series Three Phase Asynchronous for Water Pump, Air Compressor, Gear Reducer Fan Blower AC induction Electric Motor 

 

Product Description

 

Detailed Photos

 

 

Installation Instructions

 

 

Product Parameters

 

PERFORMANCE DATA
Type Output (KW)   Full Load Noise dB(A) Vibration(mm/s) LRT BDT LRA
HP Current (A) Speed (r/min) Eff. (%) P.F.(COS∅) RLT RLT RLA
Synchronous Speed 3000r/min(2P)
ZB2-63M1-2 0.18 0.25 0.64  2800 52.8  0.81  61 1.8 2.4 2.4 6.0 
ZB2-63M2-2 0.25 0.35 0.81  2800 58.2  0.81  61 1.8 2.4 2.4 6.0 
ZB2-71M1-2 0.37 0.5 1.09  2800 63.9  0.81  64 1.8 2.4 2.4 6.7 
ZB2-71M2-2 0.55 0.75 1.48  2800 69.0  0.82  64 1.8 2.4 2.5 6.7 
ZB2-80M1-2 0.75 1 1.90  2825 72.1  0.83  67 1.8 2.4 2.5 6.7 
ZB2-80M2-2 1.1 1.5 2.65  2825 75.0  0.84  67 1.8 2.4 2.5 7.7 
ZB2-90S-2 1.5 2 3.51  2840 77.2  0.84  72 1.8 2.4 2.5 7.7 
ZB2-90L-2 2.2 3 4.93  2840 79.7  0.85  72 1.8 2.4 2.5 7.7 
ZB2-100L-2 3 4 6.4  2880 81.5  0.87  76 1.8 2.4 2.5 8.3 
ZB2-112M-2 4 5.5 8.3  2890 83.1  0.88  77 1.8 2.4 2.5 8.3 
ZB2-132S1-2 5.5 7.5 11.2  2900 84.7  0.88  80 1.8 2.4 2.5 8.3 
ZB2-132S2-2 7.5 10 15.1  2900 86.0  0.88  80 1.8 2.4 2.5 8.3 
ZB2-160M1-2 11 15 21.4  2930 87.6  0.89  86 2.8 2.4 2.5 8.3 
ZB2-160M2-2 15 20 28.9  2930 88.7  0.89  86 2.8 2.4 2.5 8.3 
ZB2-160L-2 18.5 25 35.0  2930 89.3  0.90  86 2.8 2.4 2.5 8.3 
ZB2-180M-2 22 30 41.3  2940 89.9  0.90  89 2.8 2.2 2.5 8.3 
ZB2-200L1-2 30 40 55.8  2950 90.7  0.90  92 2.8 2.2 2.5 8.3 
ZB2-200L2-2 37 50 68.5  2950 91.2  0.90  92 2.8 2.2 2.5 8.3 
ZB2-225M-2 45 60 82.8  2970 91.7  0.90  92 2.8 2.2 2.5 8.3 
ZB2-250M-2 55 75 101  2970 92.1  0.90  93 3.5 2.2 2.5 8.3 
ZB2-280S-2 75 100 137  2970 92.7  0.90  94 3.5 2.2 2.5 8.3 
ZB2-280M-2 90 125 162  2970 93.0  0.91  94 3.5 2.2 2.5 8.3 
ZB2-315S-2 110 150 197  2980 93.3  0.91  96 3.5 2.0  2.4 7.8 
ZB2-315M-2 132 180 236  2980 93.5  0.91  96 3.5 2.0  2.4 7.8 
ZB2-315L1-2 160 220 282  2980 93.8  0.92  99 3.5 2.0  2.4 7.8 
ZB2-315L2-2 200 270 351  2980 94.0  0.92  99 3.5 2.0  2.4 7.8 
ZB2-355M1-2 220 300 387  2980 94.0  0.92  103 3.5 2.0  2.4 7.8 
ZB2-355M2-2 250 340 439  2980 94.0  0.92  103 3.5 1.8  2.4 7.8 
ZB2-355L1-2 280 380 492  2980 94.0  0.92  103 3.5 1.8  2.4 7.8 
ZB2-355L2-2 315 430 553  2980 94.0  0.92  103 3.5 1.8  2.4 7.8 
                       
                       
PERFORMANCE DATA
Type Output (KW)   Full Load Noise dB(A) Vibration(mm/s) LRT BDT LRA
HP Current (A) Speed (r/min) Eff. (%) P.F.(COS∅) RLT RLT RLA
 Synchronous Speed 1500r/min(4P)
ZB2-63M1-4 0.12 0.18 0.51  1400 50.0  0.72  52 1.8 2.3 2.4 4.8 
ZB2-63M2-4 0.18 0.25 0.66  1400 57.0  0.73  52 1.8 2.3 2.4 4.8 
ZB2-71M1-4 0.25 0.35 0.83  1400 61.5  0.74  55 1.8 2.3 2.4 5.7 
ZB2-71M2-4 0.37 0.5 1.14  1400 66.0  0.75  55 1.8 2.3 2.4 5.7 
ZB2-80M1-4 0.55 0.75 1.59  1390 70.0  0.75  58 1.8 2.5 2.5 5.7 
ZB2-80M2-4 0.75 1 2.08  1390 72.1  0.76  58 1.8 2.5 2.5 6.6 
ZB2-90S-4 1.1 1.5 2.89  1400 75.0  0.77  61 1.8 2.5 2.5 6.6 
ZB2-90L-4 1.5 2 3.74  1400 77.2  0.79  61 1.8 2.5 2.5 6.6 
ZB2-100L1-4 2.2 3 5.2  1420 79.7  0.81  64 1.8 2.5 2.5 7.7 
ZB2-100L2-4 3 4 6.8  1420 81.5  0.82  64 1.8 2.5 2.5 7.7 
ZB2-112M-4 4 5.5 8.9  1440 83.1  0.82  65 1.8 2.5 2.5 7.7 
ZB2-132S-4 5.5 7.5 11.9  1440 84.7  0.83  71 1.8 2.5 2.5 7.7 
ZB2-132M-4 7.5 10 15.8  1440 86.0  0.84  71 1.8 2.5 2.5 7.7 
ZB2-160M-4 11 15 22.7  1460 87.6  0.84  75 2.8 2.4 2.5 7.7 
ZB2-160L-4 15 20 30.2  1460 88.7  0.85  75 2.8 2.4 2.5 8.3 
ZB2-180M-4 18.5 25 36.6  1470 89.3  0.86  76 2.8 2.4 2.5 8.3 
ZB2-180L-4 22 30 43.2  1470 89.9  0.86  76 2.8 2.4 2.5 8.3 
ZB2-200L-4 30 40 58.4  1480 90.7  0.86  79 2.8 2.4 2.5 7.9 
ZB2-225S-4 37 50 70.9  1480 91.2  0.87  91 2.8 2.4 2.5 7.9 
ZB2-225M-4 45 60 86  1480 91.7  0.87  91 2.8 2.4 2.5 7.9 
ZB2-250M-4 55 75 104  1480 92.1  0.87  83 3.5 2.4 2.5 7.9 
ZB2-280S-4 75 100 141  1480 92.7  0.87  86 3.5 2.4 2.5 7.9 
ZB2-280M-4 90 125 169  1485 93.0  0.87  86 3.5 2.4  2.5 7.9 
ZB2-315S-4 110 150 204  1485 93.3  0.88  93 3.5 2.3  2.4 7.6 
ZB2-315M-4 132 180 244  1485 93.5  0.88  93 3.5 2.3  2.4 7.6 
ZB2-315L1-4 160 220 291  1485 93.8  0.89  97 3.5 2.3  2.4 7.6 
ZB2-315L2-4 200 270 363  1485 94.0  0.89  97 3.5 2.3  2.4 7.6 
ZB2-355M1-4 220 300 400  1490 94.0  0.89  101 3.5 2.3  2.4 7.6 
ZB2-355M2-4 250 340 449  1490 94.0  0.90  101 3.5 2.3  2.4 7.6 
ZB2-355L1-4 280 380 503  1490 94.0  0.90  101 3.5 2.3  2.4 7.6 
ZB2-355L2-4 315 430 565.73  1490 94.0  0.90  101 3.5 2.3 2.4 7.6 
                       
                       
PERFORMANCE DATA
Type Output (KW)   Full Load Noise dB(A) Vibration(mm/s) LRT BDT LRA
HP Current (A) Speed (r/min) Eff. (%) P.F.(COS∅) RLT RLT RLA
Synchronous Speed 1000r/min(6P)
ZB2-71M1-6 0.18 0.25 0.91  900 45.5  0.66  52 1.8 2.1 2.2 4.4 
ZB2-71M2-6 0.25 0.35 1.07  900 52.1  0.68  52 1.8 2.1 2.2 4.4 
ZB2-80M1-6 0.37 0.5 1.35  900 59.7  0.70  54 1.8 2.1 2.2 5.2 
ZB2-80M2-6 0.55 0.75 1.76  900 65.8  0.72  54 1.8 2.1 2.3 5.2 
ZB2-90S-6 0.75 1 2.26  910 70.0  0.72  57 1.8 2.2 2.3 6.0 
ZB2-90L-6 1.1 1.5 3.14  910 72.9  0.73  57 1.8 2.2 2.3 6.0 
ZB2-100L-6 1.5 2 4.04  940 75.2  0.75  61 1.8 2.2 2.3 6.0 
ZB2-112M-6 2.2 3 5.66  940 77.7  0.76  65 1.8 2.2 2.3 7.2 
ZB2-132S-6 3 4 7.5  960 79.7  0.76  69 1.8 2.2 2.3 7.2 
ZB2-132M1-6 4 5.5 9.8  960 81.4  0.76  69 1.8 2.2 2.3 7.2 
ZB2-132M2-6 5.5 7.5 13.1  960 83.1  0.77  69 1.8 2.2 2.3 7.2 
ZB2-160M-6 7.5 10 17.5  970 84.7  0.77  73 2.8 2.2 2.3 7.2 
ZB2-160L-6 11 15 24.8  970 86.4  0.78  73 2.8 2.2 2.3 7.2 
ZB2-180L-6 15 20 32.1  970 87.7  0.81  73 2.8 2.2 2.3 7.7 
ZB2-200L1-6 18.5 25 39.2  970 88.6  0.81  76 2.8 2.2 2.3 7.7 
ZB2-200L2-6 22 30 45.1  970 89.2  0.83  76 2.8 2.2 2.3 7.7 
ZB2-225M-6 30 40 60.9  980 90.2  0.83  76 2.8 2.2 2.3 7.7 
ZB2-250M-6 37 50 73.7  980 90.8  0.84  78 3.5 2.2 2.3 7.7 
ZB2-280S-6 45 60 87.0  980 91.4  0.86  80 3.5 2.2 2.2 7.7 
ZB2-280M-6 55 75 106  980 91.9  0.86  80 3.5 2.2 2.2 7.7 
ZB2-315S-6 75 100 143  980 92.6  0.86  85 3.5 2.2 2.2 7.7 
ZB2-315M-6 90 125 171  935 92.9  0.86  85 3.5 2.2 2.2 7.7 
ZB2-315L1-6 110 150 208  935 93.3  0.86  85 3.5 2.2  2.2 7.4 
ZB2-315L2-6 132 180 247  935 93.5  0.87  85 3.5 2.2  2.2 7.4 
ZB2-355M1-6 160 220 295  990 93.8  0.88  92 3.5 2.1  2.2 7.4 
ZB2-355M2-6 200 270 367  990 94.0  0.88  92 3.5 2.1  2.2 7.4 
ZB2-355L1-6 220 300 404  990 94.0  0.88  92 3.5 2.1  2.2 7.4 
ZB2-355L2-6 250 340 459  990 94.0  0.88  92 3.5 2.1  2.2 7.4 
                       
                       
PERFORMANCE DATA
Type Output (KW)   Full Load Noise dB(A) Vibration(mm/s) LRT BDT LRA
HP Current (A) Speed (r/min) Eff. (%) P.F.(COS∅) RLT RLT RLA
Synchronous Speed 750r/min(8P)
ZB2-80M1-8 0.18 0.25 1.18  900 38.0  0.61  52 1.8 2 2.1 3.6 
ZB2-80M2-8 0.25 0.35 1.43  690 43.4  0.61  52 1.8 2 2.1 3.6 
ZB2-90S-8 0.37 0.5 1.85  690 49.7  0.61  56 1.8 2 2.1 4.4 
ZB2-90L-8 0.55 0.75 2.44  690 56.1  0.61  56 1.8 2 2.2 4.4 
ZB2-100L1-8 0.75 1 2.78  700 61.2  0.67  59 1.8 2 2.2 4.4 
ZB2-100L2-8 1.1 1.5 3.64  700 66.5  0.69  59 1.8 2 2.2 5.5 
ZB2-112M-8 1.5 2 4.71  700 70.2  0.69  61 1.8 2 2.2 5.5 
ZB2-132S-8 2.2 3 6.34  710 74.2  0.71  64 1.8 2 2.2 6.6 
ZB2-132M-8 3 4 8.1  710 77.0  0.73  64 1.8 2 2.2 6.6 
ZB2-160M1-8 4 5.5 10.5  720 79.2  0.73  68 2.8 2 2.2 6.6 
ZB2-160M2-8 5.5 7.5 13.9  720 81.4  0.74  68 2.8 2.2 2.2 6.6 
ZB2-160L-8 7.5 10 18.3  720 83.1  0.75  68 2.8 2.2 2.2 6.6 
ZB2-180L-8 11 15 25.9  730 85.0  0.76  70 2.8 2.2 2.2 7.3 
ZB2-200L-8 15 20 34.8  730 86.2  0.76  73 2.8 2.2 2.2 7.3 
ZB2-225S-8 18.5 25 42.6  730 86.9  0.76  73 2.8 2.1 2.2 7.3 
ZB2-225M-8 22 30 49.0  730 87.4  0.78  73 2.8 2.1 2.2 7.3 
ZB2-250M-8 30 40 65.3  730 88.3  0.79  75 3.5 2.1 2.2 7.3 
ZB2-280S-8 37 50 80.1  730 88.8  0.79  76 3.5 2.1 2.2 7.3 
ZB2-280M-8 45 60 97.0  740 89.2  0.79  76 3.5 2.1 2.2 7.3 
ZB2-315S-8 55 75 115  740 89.7  0.81  82 3.5 2 2.2 7.3 
ZB2-315M-8 75 100 156  740 90.3  0.81  82 3.5 2 2.2 7.3 
ZB2-315L1-8 90 125 184  740 90.7  0.82  82 3.5 2 2.2 7.3 
ZB2-315L2-8 110 150 224  740 91.1  0.82  82 3.5 2.0  2.2 7.0 
ZB2-355M1-8 132 180 267  740 91.5  0.82  90 3.5 2.0  2.2 7.0 
ZB2-355M2-8 160 220 323  740 91.9  0.82  90 3.5 2.0  2.2 7.0 
ZB2-355L1-8 185 250 371  740 92.3  0.82  90 3.5 2.0  2.2 7.0 
ZB2-355L2-8 200 270 396  740 92.5  0.83  90 3.5 2.0  2.2 7.0 
                       
                       
PERFORMANCE DATA
Type Output (KW)   Full Load Noise dB(A) Vibration(mm/s) LRT BDT LRA
HP Current (A) Speed (r/min) Eff. (%) P.F.(COS∅) RLT RLT RLA
Synchronous Speed 600r/min(10P)
ZB2-315S-10 45 60 99.63  590 91.5  0.75  82 3.5 1.7 2.2 6.8 
ZB2-315M-10 55 75 121.11  590 92.0  0.75  82 3.5 1.7 2.2 6.8 
ZB2-315L1-10 75 100 162.10  590 92.5  0.76  82 3.5 1.7 2.2 6.8 
ZB2-315L2-10 90 125 190.96  590 93.0  0.77  82 3.5 1.7 2.2 6.8 
ZB2-355M1-10 110 150 229.91  590 93.2  0.78  90 3.5 1.7 2.2 6.6 
ZB2-355M2-10 132 180 275.00  590 93.5  0.78  90 3.5 1.5 2.2 6.6 
ZB2-355L1-10 160 220 333.34  590 93.5  0.78  90 3.5 1.5 2.2 6.6 
ZB2-355L2-10 185 250 385.42  590 93.5  0.78  90 3.5 1.5 2.2 6.6 

 

 

 

 

FAQ

Q: Are you trading company or manufacturer?
A: We are manufacturer.

Q: What is the payment terms?
A: 30% T/T in advance, 70% before shipment or L/C at sight. 

Q: What is your delivery time?
A: standard product 20 days after receiving your L/C or T/T deposit.

Q: What is the MOQ of this item?
A: 1 units for small/medium size motors, unlimited for large ones.

Q: How long is your warranty?
A: 12 months after receiving B/L.

Q: Can we used our own brand on motors ?
A: Yes, OEM and ODM also to be provided. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Speed: Constant Speed
Number of Stator: Three-Phase
Function: Driving
Casing Protection: Protection Type
Number of Poles: 2
Customization:
Available

|

gear motor

Can gear motors be used in robotics, and if so, what are some notable applications?

Yes, gear motors are widely used in robotics due to their ability to provide torque, precise control, and compact size. They play a crucial role in various robotic applications, enabling the movement, manipulation, and control of robotic systems. Here are some notable applications of gear motors in robotics:

1. Robotic Arm Manipulation:

Gear motors are commonly used in robotic arms to provide precise and controlled movement. They enable the articulation of the arm’s joints, allowing the robot to reach different positions and orientations. Gear motors with high torque capabilities are essential for lifting, rotating, and manipulating objects with varying weights and sizes.

2. Mobile Robots:

Gear motors are employed in mobile robots, including wheeled robots and legged robots, to drive their locomotion. They provide the necessary torque and control for the robot to move, turn, and navigate in different environments. Gear motors with appropriate gear ratios ensure the robot’s mobility, stability, and maneuverability.

3. Robotic Grippers and End Effectors:

Gear motors are used in robotic grippers and end effectors to control the opening, closing, and gripping force. By integrating gear motors into the gripper mechanism, robots can grasp and manipulate objects of various shapes, sizes, and weights. The gear motors enable precise control over the gripping action, allowing the robot to handle delicate or fragile objects with care.

4. Autonomous Drones and UAVs:

Gear motors are utilized in the propulsion systems of autonomous drones and unmanned aerial vehicles (UAVs). They drive the propellers or rotors, providing the necessary thrust and control for the drone’s flight. Gear motors with high power-to-weight ratios, efficient energy conversion, and precise speed control are crucial for achieving stable and maneuverable flight in drones.

5. Humanoid Robots:

Gear motors are integral to the movement and functionality of humanoid robots. They are used in robotic joints, such as hips, knees, and shoulders, to enable human-like movements. Gear motors with appropriate torque and speed capabilities allow humanoid robots to walk, run, climb stairs, and perform complex motions resembling human actions.

6. Robotic Exoskeletons:

Gear motors play a vital role in robotic exoskeletons, which are wearable robotic devices designed to augment human strength and assist in physical tasks. Gear motors are used in the exoskeleton’s joints and actuators, providing the necessary torque and control to enhance human abilities. They enable users to perform tasks with reduced effort, assist in rehabilitation, or provide support in physically demanding environments.

These are just a few notable applications of gear motors in robotics. Their versatility, torque capabilities, precise control, and compact size make them indispensable components in various robotic systems. Gear motors enable robots to perform complex tasks, move with agility, interact with the environment, and assist humans in a wide range of applications, from industrial automation to healthcare and exploration.

gear motor

Can you explain the role of backlash in gear motors and how it’s managed in design?

Backlash plays a significant role in gear motors and is an important consideration in their design and operation. Backlash refers to the slight clearance or play between the teeth of gears in a gear system. It affects the precision, accuracy, and responsiveness of the gear motor. Here’s an explanation of the role of backlash in gear motors and how it is managed in design:

1. Role of Backlash:

Backlash in gear motors can have both positive and negative effects:

  • Compensation for Misalignment: Backlash can help compensate for minor misalignments between gears, shafts, or the load. It allows a small amount of movement before engaging the next set of teeth, reducing the risk of damage due to misalignment. This can be particularly beneficial in applications where precise alignment is challenging or subject to variations.
  • Negative Impact on Accuracy and Responsiveness: Backlash can introduce a delay or “dead zone” in the motion transmission. When changing the direction of rotation or reversing the load, the gear teeth must first overcome the clearance or play before engaging in the opposite direction. This delay can reduce the overall accuracy, responsiveness, and repeatability of the gear motor, especially in applications that require precise positioning or rapid changes in direction or speed.

2. Managing Backlash in Design:

Designers employ various techniques to manage and minimize backlash in gear motors:

  • Tight Manufacturing Tolerances: Proper manufacturing techniques and tight tolerances can help minimize backlash. Precision machining and quality control during the production of gears and gear components ensure closer tolerances, reducing the amount of play between gear teeth.
  • Preload or Pre-tensioning: Applying a preload or pre-tensioning force to the gear system can help reduce backlash. This technique involves introducing an initial force or tension that eliminates the clearance between gear teeth. It ensures immediate contact and engagement of the gear teeth, minimizing the dead zone and improving the overall responsiveness and accuracy of the gear motor.
  • Anti-Backlash Gears: Anti-backlash gears are designed specifically to minimize or eliminate backlash. They typically feature modifications to the gear tooth profile, such as modified tooth shapes or special tooth arrangements, to reduce clearance. Anti-backlash gears can be used in gear motor designs to improve precision and minimize the effects of backlash.
  • Backlash Compensation: In some cases, backlash compensation techniques can be employed. These techniques involve monitoring the position or movement of the load and applying control algorithms to compensate for the backlash. By accounting for the clearance and adjusting the control signals accordingly, the effects of backlash can be mitigated, improving accuracy and responsiveness.

3. Application-Specific Considerations:

The management of backlash in gear motors should be tailored to the specific application requirements:

  • Positioning Accuracy: Applications that require precise positioning, such as robotics or CNC machines, may require tighter backlash control to ensure accurate and repeatable movements.
  • Dynamic Response: Applications that involve rapid changes in direction or speed, such as high-speed automation or servo control systems, may require reduced backlash to maintain responsiveness and minimize overshoot or lag.
  • Load Characteristics: The nature of the load and its impact on the gear system should be considered. Heavy loads or applications with significant inertial forces may require additional backlash management techniques to maintain stability and accuracy.

In summary, backlash in gear motors can affect precision, accuracy, and responsiveness. While it can compensate for misalignments, backlash may introduce delays and reduce the overall performance of the gear motor. Designers manage backlash through tight manufacturing tolerances, preload techniques, anti-backlash gears, and backlash compensation methods. The management of backlash depends on the specific application requirements, considering factors such as positioning accuracy, dynamic response, and load characteristics.

gear motor

What is a gear motor, and how does it combine the functions of gears and a motor?

A gear motor is a type of motor that incorporates gears into its design to combine the functions of gears and a motor. It consists of a motor, which provides the mechanical power, and a set of gears, which transmit and modify this power to achieve specific output characteristics. Here’s a detailed explanation of what a gear motor is and how it combines the functions of gears and a motor:

A gear motor typically consists of two main components: the motor and the gear system. The motor is responsible for converting electrical energy into mechanical energy, generating rotational motion. The gear system, on the other hand, consists of multiple gears with different sizes and tooth configurations. These gears are meshed together in a specific arrangement to transmit and modify the output torque and speed of the motor.

The gears in a gear motor serve several functions:

1. Torque Amplification:

One of the primary functions of the gear system in a gear motor is to amplify the torque output of the motor. By using gears with different sizes, the input torque can be effectively multiplied or reduced. This allows the gear motor to provide higher torque at lower speeds or lower torque at higher speeds, depending on the gear arrangement. This torque amplification is beneficial in applications where high torque is required, such as in heavy machinery or vehicles.

2. Speed Reduction or Increase:

The gear system in a gear motor can also be used to reduce or increase the rotational speed of the motor output. By utilizing gears with different numbers of teeth, the gear ratio can be adjusted to achieve the desired speed output. For example, a gear motor with a higher gear ratio will output lower speed but higher torque, whereas a gear motor with a lower gear ratio will output higher speed but lower torque. This speed control capability allows for precise matching of motor output to the requirements of specific applications.

3. Directional Control:

Gears in a gear motor can be used to control the direction of rotation of the motor output shaft. By employing different combinations of gears, such as spur gears, bevel gears, or worm gears, the rotational direction can be changed. This directional control is crucial in applications where bidirectional movement is required, such as in conveyor systems or robotic arms.

4. Load Distribution:

The gear system in a gear motor helps distribute the load evenly across multiple gears, which reduces the stress on individual gears and increases the overall durability and lifespan of the motor. By sharing the load among multiple gears, the gear motor can handle higher torque applications without putting excessive strain on any particular gear. This load distribution capability is especially important in heavy-duty applications that require continuous operation under demanding conditions.

By combining the functions of gears and a motor, gear motors offer several advantages. They provide torque amplification, speed control, directional control, and load distribution capabilities, making them suitable for various applications that require precise and controlled mechanical power. Gear motors are commonly used in industries such as robotics, automotive, manufacturing, and automation, where reliable and efficient power transmission is essential.

China wholesaler Good Quality CE 0.12kw-315kw Y2 Ye2 Series Three Phase Asynchronous for Water Pump, Air Compressor, Gear Reducer Fan Blower AC Induction Electric Motor   with Best Sales China wholesaler Good Quality CE 0.12kw-315kw Y2 Ye2 Series Three Phase Asynchronous for Water Pump, Air Compressor, Gear Reducer Fan Blower AC Induction Electric Motor   with Best Sales
editor by CX 2024-04-11

China factory CHINAMFG 8mm High Torque Mini Reducer 24V Electric Mini Micro Gearbox Brushless DC Gear Motor vacuum pump booster

Product Description

 

 

Product Description

Model:  ZWBMD571571-711
Rated Voltage: 3V
No Load Speed: 26rpm
No load current: 40mA
Rated Speed: 22rpm
Rated Current: 100mA
Rated Torque: 296.9g.cm
Overall Length : 30.9mm
Rated Torque of Gear Box: 330g.cm
Instant Torque of Gear Box: 800g.cm
Gear Ratio: 711:1
Gear Box Length: 16.9mm
 

Specifications:

Model Application Parameters Rated Torque of Gear Box Instant Torque of Gear Box Gear Ratio Gear Box Length
L1
Rated At No Load At Rated Load Overall Length
L
Voltage Speed Current Speed Current Torque
VDC rpm mA rpm mA gf.cm mN.m mm gf.cm gf.cm mm
ZWBMD006006-110 3.0 166 37 140 100 54.3 5.33 28.5 330 800 110.6 14.5
ZWBMD006006-148 3.0 124 37 105 100 72.8 7.14 28.5 330 800 148.1 14.5
ZWBMD006006-198 3.0 93 37 78 100 97.5 9.56 28.5 330 800 198.4 14.5
ZWBMD006006-266 3.0 69 37 58 100 130.5 12.80 28.5 330 800 265.7 14.5
ZWBMD006006-531 3.0 35 40 29 100 221.7 21.74 30.9 330 800 530.8 16.9
ZWBMD006006-711 3.0 26 40 21 100 296.9 29.12 30.9 330 800 711.0 16.9
ZWBMD006006-952 3.0 19 40 16 95 330 32.36 30.9 330 800 952.2 16.9
ZWBMD006006-1275 3.0 14 40 12 85 330 32.36 30.9 330 800 1275.2 16.9
ZWBMD006006-1708 3.0 11 40 10 75 330 32.36 30.9 330 800 1707.9 16.9

above specifications just for reference and customizable according to requirements.

Please let us know your requirements and we will provide you with micro transmission solutions.

2D Drawing

Detailed Photos

 

 

Application

Smart wearable devices   watch,VR,AR,XR and etc.
Household application kitchen appliances, sewing machines, corn popper, vacuum cleaner, garden tool, sanitary ware, window curtain, intelligent closestool, sweeping robot, power seat, standing desk, electric sofa, TV, computer, treadmill, spyhole, cooker hood, electric drawer, electric mosquito net, intelligent cupboard, intelligent wardrobe, automatic soap dispenser, UV baby bottle sterilizer, lifting hot pot cookware, dishwasher, washing machine, food breaking machine, dryer, air conditioning, dustbin, coffee machine, whisk,smart lock,bread maker,Window cleaning robot and etc.
communication equipment 5G base station,video conference,mobile phone and etc.
Office automation equipments   scanners, printers, multifunction machines copy machines, fax (FAX paper cutter), computer peripheral, bank machine,  screen, lifting socket,  display,notebook PC and etc.
Automotive products  conditioning damper actuator, car DVD,door lock actuator, retractable rearview mirror, meters, optic axis control device, head light beam level adjuster, car water pump, car antenna, lumbar support, EPB, car tail gate electric putter, HUD, head-up display, vehicle sunroof, EPS, AGS, car window, head restraint, E-booster, car seat, vehicle charging station and etc.
Toys and models  radio control model, automatic cruise control, ride-on toy, educational robot, programming robot, medical robot, automatic feeder, intelligent building blocks, escort robot and etc.
Medical equipments  blood pressure meter, breath machine, medical cleaning pump, medical bed, blood pressure monitors, medical ventilator, surgical staplers, infusion pump, dental instrument, self-clotting cutter, wound cleaning pump for orthopedic surgery,electronic cigarette, eyebrow pencil,fascia gun, , surgical robot,laboratory automation and etc.
Industrials   flow control valves, seismic testing,automatic reclosing,Agricultural unmanned aerial vehicle,automatic feeder ,intelligent express cabinet and etc.
Electric power tools  electric drill, screwdriver,garden tool and etc.
Precision instruments  optics instruments,automatic vending machine, wire-stripping machine and etc.
Personal care tooth brush, hair clipper, electric shaver, massager, vibrator, hair dryer, rubdown machine, scissor hair machine, foot grinder,anti-myopia pen, facial beauty equipment, hair curler,Electric threading knife,POWER PERFECT PORE, Puff machine,eyebrow tweezers and etc.
Consumer electronics camera, mobile phone,digital camera, automatic retracting device,camcorder,  kinescope DVD,headphone stereo, cassette tape recorder, bluetooth earbud charging case, turntable, tablet,UAV(unmanned aerial vehicle),surveillance camera,PTZ camera, rotating smart speaker and etc.
robots educational robot, programming robot, medical robot, escort robot and etc.

Company Profile

HangZhou CHINAMFG Machinery & Electronics Co., Ltd was established in 2001,We provide the total drive solution for customers from design, tooling fabrication, components manufacturing and assembly. 

Workshop

Testing Equipment

1) Competitive Advantages

  • 1) Competitive Advantages
    19+year experience in manufacturing motor gearbox
    We provide technical support from r&d, prototype, testing, assembly and serial production , ODM &OEM
    Competitive Price
    Product Performance: Low noise, High efficiency, Long lifespan
    Prompt Delivery: 15 working days after payment
    Small Orders Accepted

 2) Main Products

  • Precision reduction gearbox and its diameter:3.4mm-38mm,voltage:1.5-24V,power: 0.01-40W,output speed:5-2000rpm and output torque:1.0 gf.cm -50kgf.cm,

  • Customized worm and gear transmission machinery;
  • Precise electromechanical motion module;
  • Precise component and assembly of plastic and metal powder injection.

 

Our Services

  • ODM & OEM
  • Gearbox design and development
  • Related technology support
  • Micro drive gearbox custom solution

Packaging & Shipping

1) Packing Details

packed in nylon firstly, then carton, and then reinforced with wooden case for outer packing.
Or according to client’s requirement.

2) Shipping Details

samples will be shipped within 10 days;
batch order leading time according to the actual situation.

 

Certifications

Certifications

We Have passed to hold ISO9001:2015(CN11/3571),ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) and IATF16949:2016(CN11/3571.01).

and more…

 

FAQ

FAQ

1. Can you make the gearbox with custom specifications?
YES. We have design and development team, also a great term of engineers, each of them have
many work years experience.

2.Do you provide the samples?
YES. Our company can provide the samples to you, and the delivery time is about 5-15days according to the specification of gearbox you need.

3.What is your MOQ?
Our MOQ is 2000pcs. But at the beginning of our business, we accept small order.

4. Do you have the item in stock?
I am sorry we donot have the item in stock, All products are made with orders.

5. Do you provide technology support?
YES. Our company have design and development team, we can provide technology support if you
need.

6.How to ship to us?
We will ship the goods to you according to the DHL or UPS or FEDEX etc account you provide. 

7.How to pay the money?
We accept T/T in advance. Also we have different bank account for receiving money, like US dollors or RMB etc.

8. How can I know the product is suitable for me?
Frist, you need to provide us the more details information about the product. We will recommend the item to you according to your requirement of specification. After you confirm, we will prepare the samples to you. also we will offer some good advances according to your product use.

9. Can I come to your company to visit?
YES, you can come to our company to visit at anytime, and welcome to visit our company.

10. How do contact us ?
 Please send an inquiry

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Universal, Industrial, Household Appliances, Car, Camera
Operating Speed: Low Speed
Excitation Mode: Permanent Magnet
Function: Control
Casing Protection: Drip-Proof
Number of Poles: 2
Samples:
US$ 90/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

gear motor

Are gear motors suitable for both heavy-duty industrial applications and smaller-scale uses?

Yes, gear motors are suitable for both heavy-duty industrial applications and smaller-scale uses. Their versatility and ability to provide torque multiplication make them valuable in a wide range of applications. Here’s a detailed explanation of why gear motors are suitable for both types of applications:

1. Heavy-Duty Industrial Applications:

Gear motors are commonly used in heavy-duty industrial applications due to their robustness and ability to handle high loads. Here are the reasons why they are suitable for such applications:

  • Torque Multiplication: Gear motors are designed to provide high torque output, making them ideal for applications that require substantial force to move or operate heavy machinery, conveyors, or equipment.
  • Load Handling: Industrial settings often involve heavy loads and demanding operating conditions. Gear motors, with their ability to handle high loads, are well-suited for tasks such as lifting, pulling, pushing, or driving heavy materials or equipment.
  • Durability: Heavy-duty industrial applications require components that can withstand harsh environments, frequent use, and demanding operating conditions. Gear motors are typically constructed with durable materials and designed to withstand heavy vibrations, shock loads, and temperature variations.
  • Speed Reduction: Many industrial processes require the reduction of motor speed to achieve the desired output speed. Gear motors offer precise speed reduction capabilities through gear ratios, allowing for optimal control and operation of machinery and equipment.

2. Smaller-Scale Uses:

While gear motors excel in heavy-duty industrial applications, they are also suitable for smaller-scale uses across various industries and applications. Here’s why gear motors are well-suited for smaller-scale uses:

  • Compact Size: Gear motors are available in compact sizes, making them suitable for applications with limited space or small-scale machinery, devices, or appliances.
  • Torque and Power Control: Even in smaller-scale applications, there may be a need for torque multiplication or precise power control. Gear motors can provide the necessary torque and power output for tasks such as precise positioning, controlling speed, or driving small loads.
  • Versatility: Gear motors come in various configurations, such as parallel shaft, planetary, or worm gear designs, offering flexibility to match specific requirements. They can be adapted to different applications, including robotics, medical devices, automotive systems, home automation, and more.
  • Efficiency: Gear motors are designed to be efficient, converting the electrical input power into mechanical output power with minimal losses. This efficiency is advantageous for smaller-scale applications where energy conservation and battery life are critical.

Overall, gear motors are highly versatile and suitable for both heavy-duty industrial applications and smaller-scale uses. Their ability to provide torque multiplication, handle high loads, offer precise speed control, and accommodate various sizes and configurations makes them a reliable choice in a wide range of applications. Whether it’s powering large industrial machinery or driving small-scale automation systems, gear motors provide the necessary torque, control, and durability required for efficient operation.

gear motor

How does the voltage and power rating of a gear motor impact its suitability for different tasks?

The voltage and power rating of a gear motor are important factors that influence its suitability for different tasks. These specifications determine the motor’s electrical characteristics and its ability to perform specific tasks effectively. Here’s a detailed explanation of how voltage and power rating impact the suitability of a gear motor for different tasks:

1. Voltage Rating:

The voltage rating of a gear motor refers to the electrical voltage it requires to operate optimally. Here’s how the voltage rating affects suitability:

  • Compatibility with Power Supply: The gear motor’s voltage rating must match the available power supply. Using a motor with a voltage rating that is too high or too low for the power supply can lead to improper operation or damage to the motor.
  • Electrical Safety: Adhering to the specified voltage rating ensures electrical safety. Using a motor with a higher voltage rating than recommended can pose safety hazards, while using a motor with a lower voltage rating may result in inadequate performance.
  • Application Flexibility: Different tasks or applications may have specific voltage requirements. For example, low-voltage gear motors are commonly used in battery-powered devices or applications with low-power requirements, while high-voltage gear motors are suitable for industrial applications or tasks that require higher power output.

2. Power Rating:

The power rating of a gear motor indicates its ability to deliver mechanical power. It is typically specified in units of watts (W) or horsepower (HP). The power rating impacts the suitability of a gear motor in the following ways:

  • Load Capacity: The power rating determines the maximum load that a gear motor can handle. Motors with higher power ratings are capable of driving heavier loads or handling tasks that require more torque.
  • Speed and Torque: The power rating affects the motor’s speed and torque characteristics. Motors with higher power ratings generally offer higher speeds and greater torque output, making them suitable for applications that require faster operation or the ability to overcome higher resistance or loads.
  • Efficiency and Energy Consumption: The power rating is related to the motor’s efficiency and energy consumption. Higher power-rated motors may be more efficient, resulting in lower energy losses and reduced operating costs over time.
  • Thermal Considerations: Motors with higher power ratings may generate more heat during operation. It is crucial to consider the motor’s power rating in relation to its thermal management capabilities to prevent overheating and ensure long-term reliability.

Considerations for Task Suitability:

When selecting a gear motor for a specific task, it is important to consider the following factors in relation to the voltage and power rating:

  • Required Torque and Load: Assess the torque and load requirements of the task to ensure that the gear motor’s power rating is sufficient to handle the expected load without being overloaded.
  • Speed and Precision: Consider the desired speed and precision of the task. Motors with higher power ratings generally offer better speed control and accuracy.
  • Power Supply Availability: Evaluate the availability and compatibility of the power supply with the gear motor’s voltage rating. Ensure that the power supply can provide the required voltage for the motor’s optimal operation.
  • Environmental Factors: Consider any specific environmental factors, such as temperature or humidity, that may impact the gear motor’s performance. Ensure that the motor’s voltage and power ratings are suitable for the intended operating conditions.

In summary, the voltage and power rating of a gear motor have significant implications for its suitability in different tasks. The voltage rating determines compatibility with the power supply and ensures electrical safety, while the power rating influences load capacity, speed, torque, efficiency, and thermal considerations. When choosing a gear motor, it is crucial to carefully evaluate the task requirements and consider the voltage and power rating in relation to factors such as torque, speed, power supply availability, and environmental conditions.

gear motor

What is a gear motor, and how does it combine the functions of gears and a motor?

A gear motor is a type of motor that incorporates gears into its design to combine the functions of gears and a motor. It consists of a motor, which provides the mechanical power, and a set of gears, which transmit and modify this power to achieve specific output characteristics. Here’s a detailed explanation of what a gear motor is and how it combines the functions of gears and a motor:

A gear motor typically consists of two main components: the motor and the gear system. The motor is responsible for converting electrical energy into mechanical energy, generating rotational motion. The gear system, on the other hand, consists of multiple gears with different sizes and tooth configurations. These gears are meshed together in a specific arrangement to transmit and modify the output torque and speed of the motor.

The gears in a gear motor serve several functions:

1. Torque Amplification:

One of the primary functions of the gear system in a gear motor is to amplify the torque output of the motor. By using gears with different sizes, the input torque can be effectively multiplied or reduced. This allows the gear motor to provide higher torque at lower speeds or lower torque at higher speeds, depending on the gear arrangement. This torque amplification is beneficial in applications where high torque is required, such as in heavy machinery or vehicles.

2. Speed Reduction or Increase:

The gear system in a gear motor can also be used to reduce or increase the rotational speed of the motor output. By utilizing gears with different numbers of teeth, the gear ratio can be adjusted to achieve the desired speed output. For example, a gear motor with a higher gear ratio will output lower speed but higher torque, whereas a gear motor with a lower gear ratio will output higher speed but lower torque. This speed control capability allows for precise matching of motor output to the requirements of specific applications.

3. Directional Control:

Gears in a gear motor can be used to control the direction of rotation of the motor output shaft. By employing different combinations of gears, such as spur gears, bevel gears, or worm gears, the rotational direction can be changed. This directional control is crucial in applications where bidirectional movement is required, such as in conveyor systems or robotic arms.

4. Load Distribution:

The gear system in a gear motor helps distribute the load evenly across multiple gears, which reduces the stress on individual gears and increases the overall durability and lifespan of the motor. By sharing the load among multiple gears, the gear motor can handle higher torque applications without putting excessive strain on any particular gear. This load distribution capability is especially important in heavy-duty applications that require continuous operation under demanding conditions.

By combining the functions of gears and a motor, gear motors offer several advantages. They provide torque amplification, speed control, directional control, and load distribution capabilities, making them suitable for various applications that require precise and controlled mechanical power. Gear motors are commonly used in industries such as robotics, automotive, manufacturing, and automation, where reliable and efficient power transmission is essential.

China factory CHINAMFG 8mm High Torque Mini Reducer 24V Electric Mini Micro Gearbox Brushless DC Gear Motor   vacuum pump booster	China factory CHINAMFG 8mm High Torque Mini Reducer 24V Electric Mini Micro Gearbox Brushless DC Gear Motor   vacuum pump booster
editor by CX 2024-04-04

China manufacturer High Efficient L Type Speed Reducer Electric DC Brushless Gear Motor For Barrier Gate System wholesaler

Product Description

DC Brushless Gear Motor With L Type Speed Reducer For Barrier Gate System
 

Detailed Photos

Product Parameters

 

Related Brushless Motor

Other Related Products

Click here to find what you are looking for:

 

Company Profile

 

FAQ

Q: What’re your main products?

A: We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge. 

Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.

Please contact us if you have detailed requests, thank you ! /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Operating Speed: Constant Speed
Excitation Mode: Shunt
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gear motor

Can gear motors be used in robotics, and if so, what are some notable applications?

Yes, gear motors are widely used in robotics due to their ability to provide torque, precise control, and compact size. They play a crucial role in various robotic applications, enabling the movement, manipulation, and control of robotic systems. Here are some notable applications of gear motors in robotics:

1. Robotic Arm Manipulation:

Gear motors are commonly used in robotic arms to provide precise and controlled movement. They enable the articulation of the arm’s joints, allowing the robot to reach different positions and orientations. Gear motors with high torque capabilities are essential for lifting, rotating, and manipulating objects with varying weights and sizes.

2. Mobile Robots:

Gear motors are employed in mobile robots, including wheeled robots and legged robots, to drive their locomotion. They provide the necessary torque and control for the robot to move, turn, and navigate in different environments. Gear motors with appropriate gear ratios ensure the robot’s mobility, stability, and maneuverability.

3. Robotic Grippers and End Effectors:

Gear motors are used in robotic grippers and end effectors to control the opening, closing, and gripping force. By integrating gear motors into the gripper mechanism, robots can grasp and manipulate objects of various shapes, sizes, and weights. The gear motors enable precise control over the gripping action, allowing the robot to handle delicate or fragile objects with care.

4. Autonomous Drones and UAVs:

Gear motors are utilized in the propulsion systems of autonomous drones and unmanned aerial vehicles (UAVs). They drive the propellers or rotors, providing the necessary thrust and control for the drone’s flight. Gear motors with high power-to-weight ratios, efficient energy conversion, and precise speed control are crucial for achieving stable and maneuverable flight in drones.

5. Humanoid Robots:

Gear motors are integral to the movement and functionality of humanoid robots. They are used in robotic joints, such as hips, knees, and shoulders, to enable human-like movements. Gear motors with appropriate torque and speed capabilities allow humanoid robots to walk, run, climb stairs, and perform complex motions resembling human actions.

6. Robotic Exoskeletons:

Gear motors play a vital role in robotic exoskeletons, which are wearable robotic devices designed to augment human strength and assist in physical tasks. Gear motors are used in the exoskeleton’s joints and actuators, providing the necessary torque and control to enhance human abilities. They enable users to perform tasks with reduced effort, assist in rehabilitation, or provide support in physically demanding environments.

These are just a few notable applications of gear motors in robotics. Their versatility, torque capabilities, precise control, and compact size make them indispensable components in various robotic systems. Gear motors enable robots to perform complex tasks, move with agility, interact with the environment, and assist humans in a wide range of applications, from industrial automation to healthcare and exploration.

gear motor

Can you explain the role of backlash in gear motors and how it’s managed in design?

Backlash plays a significant role in gear motors and is an important consideration in their design and operation. Backlash refers to the slight clearance or play between the teeth of gears in a gear system. It affects the precision, accuracy, and responsiveness of the gear motor. Here’s an explanation of the role of backlash in gear motors and how it is managed in design:

1. Role of Backlash:

Backlash in gear motors can have both positive and negative effects:

  • Compensation for Misalignment: Backlash can help compensate for minor misalignments between gears, shafts, or the load. It allows a small amount of movement before engaging the next set of teeth, reducing the risk of damage due to misalignment. This can be particularly beneficial in applications where precise alignment is challenging or subject to variations.
  • Negative Impact on Accuracy and Responsiveness: Backlash can introduce a delay or “dead zone” in the motion transmission. When changing the direction of rotation or reversing the load, the gear teeth must first overcome the clearance or play before engaging in the opposite direction. This delay can reduce the overall accuracy, responsiveness, and repeatability of the gear motor, especially in applications that require precise positioning or rapid changes in direction or speed.

2. Managing Backlash in Design:

Designers employ various techniques to manage and minimize backlash in gear motors:

  • Tight Manufacturing Tolerances: Proper manufacturing techniques and tight tolerances can help minimize backlash. Precision machining and quality control during the production of gears and gear components ensure closer tolerances, reducing the amount of play between gear teeth.
  • Preload or Pre-tensioning: Applying a preload or pre-tensioning force to the gear system can help reduce backlash. This technique involves introducing an initial force or tension that eliminates the clearance between gear teeth. It ensures immediate contact and engagement of the gear teeth, minimizing the dead zone and improving the overall responsiveness and accuracy of the gear motor.
  • Anti-Backlash Gears: Anti-backlash gears are designed specifically to minimize or eliminate backlash. They typically feature modifications to the gear tooth profile, such as modified tooth shapes or special tooth arrangements, to reduce clearance. Anti-backlash gears can be used in gear motor designs to improve precision and minimize the effects of backlash.
  • Backlash Compensation: In some cases, backlash compensation techniques can be employed. These techniques involve monitoring the position or movement of the load and applying control algorithms to compensate for the backlash. By accounting for the clearance and adjusting the control signals accordingly, the effects of backlash can be mitigated, improving accuracy and responsiveness.

3. Application-Specific Considerations:

The management of backlash in gear motors should be tailored to the specific application requirements:

  • Positioning Accuracy: Applications that require precise positioning, such as robotics or CNC machines, may require tighter backlash control to ensure accurate and repeatable movements.
  • Dynamic Response: Applications that involve rapid changes in direction or speed, such as high-speed automation or servo control systems, may require reduced backlash to maintain responsiveness and minimize overshoot or lag.
  • Load Characteristics: The nature of the load and its impact on the gear system should be considered. Heavy loads or applications with significant inertial forces may require additional backlash management techniques to maintain stability and accuracy.

In summary, backlash in gear motors can affect precision, accuracy, and responsiveness. While it can compensate for misalignments, backlash may introduce delays and reduce the overall performance of the gear motor. Designers manage backlash through tight manufacturing tolerances, preload techniques, anti-backlash gears, and backlash compensation methods. The management of backlash depends on the specific application requirements, considering factors such as positioning accuracy, dynamic response, and load characteristics.

gear motor

What are the different types of gears used in gear motors, and how do they impact performance?

Various types of gears are used in gear motors, each with its unique characteristics and impact on performance. The choice of gear type depends on the specific requirements of the application, including torque, speed, efficiency, noise level, and space constraints. Here’s a detailed explanation of the different types of gears used in gear motors and their impact on performance:

1. Spur Gears:

Spur gears are the most common type of gears used in gear motors. They have straight teeth that are parallel to the gear’s axis and mesh with another spur gear to transmit power. Spur gears provide high efficiency, reliable operation, and cost-effectiveness. However, they can generate significant noise due to the meshing of teeth, and they may produce axial thrust forces. Spur gears are suitable for applications that require high torque transmission and moderate to high rotational speeds.

2. Helical Gears:

Helical gears have angled teeth that are cut at an angle to the gear’s axis. This helical tooth configuration enables gradual engagement and smoother tooth contact, resulting in reduced noise and vibration compared to spur gears. Helical gears provide higher load-carrying capacity and are suitable for applications that require high torque transmission and moderate to high rotational speeds. They are commonly used in gear motors where low noise operation is desired, such as in automotive applications and industrial machinery.

3. Bevel Gears:

Bevel gears have teeth that are cut on a conical surface. They are used to transmit power between intersecting shafts, usually at right angles. Bevel gears can have straight teeth (straight bevel gears) or curved teeth (spiral bevel gears). These gears provide efficient power transmission and precise motion control in applications where shafts need to change direction. Bevel gears are commonly used in gear motors for applications such as steering systems, machine tools, and printing presses.

4. Worm Gears:

Worm gears consist of a worm (a type of screw) and a mating gear called a worm wheel or worm gear. The worm has a helical thread that meshes with the worm wheel, resulting in a compact and high gear reduction ratio. Worm gears provide high torque transmission, low noise operation, and self-locking properties, which prevent reverse motion. They are commonly used in gear motors for applications that require high gear reduction and locking capabilities, such as in lifting mechanisms, conveyor systems, and machine tools.

5. Planetary Gears:

Planetary gears, also known as epicyclic gears, consist of a central sun gear, multiple planet gears, and an outer ring gear. The planet gears mesh with both the sun gear and the ring gear, creating a compact and efficient gear system. Planetary gears offer high torque transmission, high gear reduction ratios, and excellent load distribution. They are commonly used in gear motors for applications that require high torque and compact size, such as in robotics, automotive transmissions, and industrial machinery.

6. Rack and Pinion:

Rack and pinion gears consist of a linear rack (a straight toothed bar) and a pinion gear (a spur gear with a small diameter). The pinion gear meshes with the rack to convert rotary motion into linear motion or vice versa. Rack and pinion gears provide precise linear motion control and are commonly used in gear motors for applications such as linear actuators, CNC machines, and steering systems.

The choice of gear type in a gear motor depends on factors such as the desired torque, speed, efficiency, noise level, and space constraints. Each type of gear offers specific advantages and impacts the performance of the gear motor differently. By selecting the appropriate gear type, gear motors can be optimized for their intended applications, ensuring efficient and reliable power transmission.

China manufacturer High Efficient L Type Speed Reducer Electric DC Brushless Gear Motor For Barrier Gate System   wholesaler China manufacturer High Efficient L Type Speed Reducer Electric DC Brushless Gear Motor For Barrier Gate System   wholesaler
editor by CX 2024-03-26

China OEM 0.75kw 1.5kw 3kw 4kw 5.5kw 11kw 22kw 37kw AC Gear Reduction Electric Speed Reducer Motor for Agitator Mixer vacuum pump belt

Product Description

We, GOGOGO Mechanical&Electrical Co.,Ltd specialize in high quality energy-efficient electric motors. The combination of the best available materials, high quality sheet metal and the right amount of copper in the rotor/stator makes GOGOGO’s electric motors highly energy-efficient.

We design our electric motors to fit and match our customer’s requirements at our production site. The electric motors can be supplemented with a range of options and accessories or modified with a special design to endure any environment.
 

Electric motors account for a large part of the electricity used. If we look at the world, electric motors account for about 65 percent of the electricity used in industry. To reduce this use of electricity, there are legal requirements regarding the efficiency of electric motors manufactured in the EU, or exported into the EU.

Three-phase, single-speed asynchronous motors are covered by the requirements today. Asynchronous motors are the most common type of motor and account for 90 percent of the electricity consumption of all electric motors in the power range 0.75 – 375 kW.

According to that standard, the energy efficiency classes have the designations IE1, IE2, IE3 and IE4, where IE4 has the highest efficiency.

 

Revision of the standard

A revision of the standard was decided by the Ecodesign Committee in 2019. The revision was published on October 1, 2019. The following will apply:

For electric motors

From July 1, 2571

2-, 4-, 6- and 8-pole motors from 0.75 – 1000 kW (previously up to 375kW) are included in efficiency class IE3.

Motors within the range 0.12 – 0.75 kW must meet efficiency class IE2.

The previous possibility to replace IE3 motors with an IE2 motor with frequency drive disappears.

From July 1, 2571

For 2-, 4-, 6- and 8-pole motors from 0.12 – 1000 kW, the efficiency class IE2 now also applies to Ex eb certified motors with high safety.

Single phase motors with greater power than 0.12 kW are covered by the corresponding IE2 class.

The higher efficiency class IE4 applies to 2, 4 and 6-pole motors between 75 – 200 kW.

For frequency inverters

From July 1, 2571

For use with electric motors with power from 0.12 – 1000 kW, the frequency inverter must pass efficiency class IE2 specially designed for inverters.

Current requirements according to the Directive

Since 16 June, 2011 it is prohibited to place electric motors below energy efficiency class IE2 on the market, or to put them into service in the EU.

Since January 1, 2015, electric motors within the range 7.5 – 375 kW (2-, 4-, and 6-pole) must meet the requirements for IE3, or IE2 if the latter is combined with frequency inverters for speed control. The legal requirement thus provides 2 options.

From January 1, 2017, the requirements were tightened so that all motors 0.75 – 375 kW (2-, 4-, and 6-pole) must meet the requirements for IE3, or IE2 if they are combined with frequency inverters.

Exemptions from the current directive

  • Operation other than S1 (continuous drive) or S3 (intermittent drive) with a nominal cyclicity factor of 80 percent or lower.
  • Made for assembly with frequency inverters (integral motors).
  • Electric motors made for use in liquid.
  • Electric motors that are fully integrated into a product (e.g. a gear, pump, fan or compressor) where the energy performance is not tested independently of the product.
  • Brake motors

Electric motors intended for operation exclusively:

  • At altitudes exceeding 4 000 CHINAMFG above sea level.
  • If ambient air temperatures exceed 60°C.
  • Where maximum operating temperature exceeds 400°C.
  • Where ambient air temperatures are less than -30°C for all motors, or less than 0°C for motors with water cooling.
  • In explosive atmospheres (as defined in Directive 94/9 / EC 9)

The requirements do not apply to ships or other means of transport that carry goods or persons, since there must be specially designed engines for this purpose. (If the same mobile conveyor belt is used on ships as well as on land, the rules apply).

Also, the requirements do not apply to repair of motors previously placed on the market, or put into service – unless the repair is so extensive that the product will in practice be brand new.

If the motor is to be further exported for use outside Europe, the requirements do not apply.

Some other requirements apply to water-cooled motors

We have our own design and development team, we can provide customers with standard AC electric motors, We can also customize the single phase/three phase motors according to the special needs of customers.    Currently our main motor products cover 3 – phase high – efficiency motors,general 3 – phase motors, single phase motors, etc.
The main motor ranges: IE3 / YE3, IE2 / YE2, IE1 / Y2, Y, YS, MS, YC, YL, YY, MC, MY, ML motors.
 American standard NEMA motors
Russian standard GOST ANP motors
ZheJiang type AEEF motors,YC motors

Why choose us?
Guarantee of our motors:18-24months
General elivery time:15-30days
Price of motors: Most reasonable during your all suppliers
Packing:Strong export cartons/wooden case/plywood cases/pallets
Payment way with your order: T/T,LC,DP,etc

Sample order: Acceptable
Shipment way: Sea ship,Air flight,Express way,Land transfer way.

If you are looking for new better supplier or purchase electric motors, please feel free contact us now.You will get all what you want. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Speed: Low Speed
Number of Stator: Three-Phase
Function: Driving, Control
Casing Protection: Closed Type
Number of Poles: 4
Samples:
US$ 60/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

gear motor

Where can individuals find reliable resources for learning more about gear motors and their applications?

Individuals seeking to learn more about gear motors and their applications have access to various reliable resources that provide valuable information and insights. Here are some sources where individuals can find reliable information about gear motors:

1. Manufacturer Websites:

Manufacturer websites are a primary source of information about gear motors. Gear motor manufacturers often provide detailed product specifications, application guides, technical documentation, and educational materials on their websites. These resources offer insights into different gear motor types, features, performance characteristics, and application considerations. Manufacturer websites are a reliable and convenient starting point for learning about gear motors.

2. Industry Associations and Organizations:

Industry associations and organizations related to mechanical engineering, automation, and motion control often have resources and publications dedicated to gear motors. These organizations provide technical articles, whitepapers, industry standards, and guidelines related to gear motor design, selection, and application. Examples of such associations include the American Gear Manufacturers Association (AGMA), International Electrotechnical Commission (IEC), and Institute of Electrical and Electronics Engineers (IEEE).

3. Technical Publications and Journals:

Technical publications and journals focused on engineering, robotics, and motion control are valuable sources of in-depth knowledge about gear motors. Publications like IEEE Transactions on Industrial Electronics, Mechanical Engineering magazine, or Motion System Design magazine often feature articles, case studies, and research papers on gear motor technology, advancements, and applications. These publications provide authoritative and up-to-date information from industry experts and researchers.

4. Online Forums and Communities:

Online forums and communities dedicated to engineering, robotics, and automation can be excellent resources for discussions, insights, and practical experiences related to gear motors. Websites like Stack Exchange, engineering-focused subreddits, or specialized forums provide platforms for individuals to ask questions, share knowledge, and engage in discussions with professionals and enthusiasts in the field. Participating in these communities allows individuals to learn from real-world experiences and gain practical insights.

5. Educational Institutions and Courses:

Technical colleges, universities, and vocational training centers often offer courses or programs in mechanical engineering, mechatronics, or automation that cover gear motor fundamentals and applications. These educational institutions provide comprehensive curricula, textbooks, and lecture materials that can serve as reliable resources for individuals interested in learning about gear motors. Additionally, online learning platforms like Coursera, Udemy, or LinkedIn Learning offer courses on topics related to gear motors and motion control.

6. Trade Shows and Exhibitions:

Attending trade shows, exhibitions, and industry conferences related to automation, robotics, or motion control provides opportunities to learn about the latest advancements in gear motor technology. These events often feature product demonstrations, technical presentations, and expert panels where individuals can interact with gear motor manufacturers, industry experts, and other professionals. It’s a great way to stay updated on the latest trends, innovations, and applications of gear motors.

When seeking reliable resources, it’s important to consider the credibility of the source, the expertise of the authors, and the relevance to the specific area of interest. By leveraging these resources, individuals can gain a comprehensive understanding of gear motors and their applications, from basic principles to advanced topics, enabling them to make informed decisions and effectively utilize gear motors in their projects or applications.

gear motor

How do gear motors compare to other types of motors in terms of power and efficiency?

Gear motors can be compared to other types of motors in terms of power output and efficiency. The choice of motor type depends on the specific application requirements, including the desired power level, efficiency, speed range, torque characteristics, and control capabilities. Here’s a detailed explanation of how gear motors compare to other types of motors in terms of power and efficiency:

1. Gear Motors:

Gear motors combine a motor with a gear mechanism to deliver increased torque output and improved control. The gear reduction enables gear motors to provide higher torque while reducing the output speed. This makes gear motors suitable for applications that require high torque, precise positioning, and controlled movements. However, the gear reduction process introduces mechanical losses, which can slightly reduce the overall efficiency of the system compared to direct-drive motors. The efficiency of gear motors can vary depending on factors such as gear quality, lubrication, and maintenance.

2. Direct-Drive Motors:

Direct-drive motors, also known as gearless or integrated motors, do not use a gear mechanism. They provide a direct connection between the motor and the load, eliminating the need for gear reduction. Direct-drive motors offer advantages such as high efficiency, low maintenance, and compact design. Since there are no gears involved, direct-drive motors experience fewer mechanical losses and can achieve higher overall efficiency compared to gear motors. However, direct-drive motors may have limitations in terms of torque output and speed range, and they may require more complex control systems to achieve precise positioning.

3. Stepper Motors:

Stepper motors are a type of gear motor that excels in precise positioning applications. They operate by converting electrical pulses into incremental steps of movement. Stepper motors offer excellent positional accuracy and control. They are capable of precise positioning and can hold a position without power. Stepper motors have relatively high torque at low speeds, making them suitable for applications that require precise control and positioning, such as robotics, 3D printers, and CNC machines. However, stepper motors may have lower overall efficiency compared to direct-drive motors due to the additional power required to overcome the detents between steps.

4. Servo Motors:

Servo motors are another type of gear motor known for their high torque, high speed, and excellent positional accuracy. Servo motors combine a motor, a feedback device (such as an encoder), and a closed-loop control system. They offer precise control over position, speed, and torque. Servo motors are widely used in applications that require accurate and responsive positioning, such as industrial automation, robotics, and camera pan-tilt systems. Servo motors can achieve high efficiency when properly optimized and controlled but may have slightly lower efficiency compared to direct-drive motors due to the additional complexity of the control system.

5. Efficiency Considerations:

When comparing power and efficiency among different motor types, it’s important to consider the specific requirements and operating conditions of the application. Factors such as load characteristics, speed range, duty cycle, and control requirements influence the overall efficiency of the motor system. While direct-drive motors generally offer higher efficiency due to the absence of mechanical losses from gears, gear motors can deliver higher torque output and enhanced control capabilities. The efficiency of gear motors can be optimized through proper gear selection, lubrication, and maintenance practices.

In summary, gear motors offer increased torque and improved control compared to direct-drive motors. However, gear reduction introduces mechanical losses that can slightly impact the overall efficiency of the system. Direct-drive motors, on the other hand, provide high efficiency and compact design but may have limitations in terms of torque and speed range. Stepper motors and servo motors, both types of gear motors, excel in precise positioning applications but may have slightly lower efficiency compared to direct-drive motors. The selection of the most suitable motor type depends on the specific requirements of the application, balancing power, efficiency, speed range, and control capabilities.

gear motor

In which industries are gear motors commonly used, and what are their primary applications?

Gear motors find widespread use in various industries due to their versatility, reliability, and ability to provide controlled mechanical power. They are employed in a wide range of applications that require precise power transmission and speed control. Here’s a detailed explanation of the industries where gear motors are commonly used and their primary applications:

1. Robotics and Automation:

Gear motors play a crucial role in robotics and automation industries. They are used in robotic arms, conveyor systems, automated assembly lines, and other robotic applications. Gear motors provide the required torque, speed control, and directional control necessary for the precise movements and operations of robots. They enable accurate positioning, gripping, and manipulation tasks in industrial and commercial automation settings.

2. Automotive Industry:

The automotive industry extensively utilizes gear motors in various applications. They are used in power windows, windshield wipers, HVAC systems, seat adjustment mechanisms, and many other automotive components. Gear motors provide the necessary torque and speed control for these systems, enabling smooth and efficient operation. Additionally, gear motors are also utilized in electric and hybrid vehicles for powertrain applications.

3. Manufacturing and Machinery:

Gear motors find wide application in the manufacturing and machinery sector. They are used in conveyor belts, packaging equipment, material handling systems, industrial mixers, and other machinery. Gear motors provide reliable power transmission, precise speed control, and torque amplification, ensuring efficient and synchronized operation of various manufacturing processes and machinery.

4. HVAC and Building Systems:

In heating, ventilation, and air conditioning (HVAC) systems, gear motors are commonly used in damper actuators, control valves, and fan systems. They enable precise control of airflow, temperature, and pressure, contributing to energy efficiency and comfort in buildings. Gear motors also find applications in automatic doors, blinds, and gate systems, providing reliable and controlled movement.

5. Marine and Offshore Industry:

Gear motors are extensively used in the marine and offshore industry, particularly in propulsion systems, winches, and cranes. They provide the required torque and speed control for various marine operations, including steering, anchor handling, cargo handling, and positioning equipment. Gear motors in marine applications are designed to withstand harsh environments and provide reliable performance under demanding conditions.

6. Renewable Energy Systems:

The renewable energy sector, including wind turbines and solar tracking systems, relies on gear motors for efficient power generation. Gear motors are used to adjust the rotor angle and position in wind turbines, optimizing their performance in different wind conditions. In solar tracking systems, gear motors enable the precise movement and alignment of solar panels to maximize sunlight capture and energy production.

7. Medical and Healthcare:

Gear motors have applications in the medical and healthcare industry, including in medical equipment, laboratory devices, and patient care systems. They are used in devices such as infusion pumps, ventilators, surgical robots, and diagnostic equipment. Gear motors provide precise control and smooth operation, ensuring accurate dosing, controlled movements, and reliable functionality in critical medical applications.

These are just a few examples of the industries where gear motors are commonly used. Their versatility and ability to provide controlled mechanical power make them indispensable in numerous applications requiring torque amplification, speed control, directional control, and load distribution. The reliable and efficient power transmission offered by gear motors contributes to the smooth and precise operation of machinery and systems in various industries.

China OEM 0.75kw 1.5kw 3kw 4kw 5.5kw 11kw 22kw 37kw AC Gear Reduction Electric Speed Reducer Motor for Agitator Mixer   vacuum pump belt	China OEM 0.75kw 1.5kw 3kw 4kw 5.5kw 11kw 22kw 37kw AC Gear Reduction Electric Speed Reducer Motor for Agitator Mixer   vacuum pump belt
editor by CX 2024-02-18

China Hot selling MS Three Phase Asynchronous AC Induction Electric Motor For Gear Reducer Fan Blower with Good quality

Product Description

MS Series Aluminum Housing Three Phase Induction Motor adopts the latest design and high quality material and are conform to the IEC standard in function, appearance, output and other requirements.
The efficiency of MS motor meets EFF2 standard in E. U., and can reach the EFF1 standard if requested. MS motor has a lot of advantages including high efficiency, energy saving, low noise, little vibration, light weight, small volume, reliable operation, up-to-date appearance, convenient operation and maintenance.
MS motor is died cast into mounding shape by aluminum-alloy. The base foot can be removable. Various mounting types are available for MS motor.

MS motor is suitable for common working environment and machinery without special requirement, like air-compressor, pump, fan, medical apparatus and instruments, small machines etc.
  Outlined Description :

Power: 0.55kw-15kw Voltage: 380/415/440V( can can done as your need)
Frequency: 50/60hz Enamelled Wire: Copper Wire (Can Done Aluminum wire as Your Need)
Insulation Class: F Mounting Way: B3 Foot /B5 Flange /B35 Foot and Flange/ B14 flange/B34 foot and flange
Protection Grade: IP55 motor body : aluminum of ac motor 

PERFORMANCE DATAS:

MODEL POWER
 (kW)

Current

(A)

SPEED
r/min

Eff

%

Power
factor

Locked rotor torque

Rated torque

Locked rotor current
Rated cuffrent

Breakdown torque
Rated torque

                                                     Synchronous speed 3000r/min
MS63M1-2 0.18 0.53 2720 65.0 0.80 2.2 5.5 2.2
MS63M2-2 0.25 0.69 2720 68.0 0.81 2.2 5.5 2.2
MS71M1-2 0.37 0.99 2740 70.0 0.81 2.2 6.1 2.2
MS71M2-2 0.55 1.4 2740 73.0 0.82 2.2 6.1 2.3
MS80M1-2 0.75 1.8 2840 75.0 0.83 2.2 6.1 2.3
MS80M2-2 1.1 2.6 2840 77.0 0.84 2.2 7.0 2.3
MS90S-2 1.5 3.4 2845 79.0 0.84 2.2 7.0 2.3
MS90L-2 2.2 4.9 2845 81.0 0.85 2.2 7.0 2.3
MS100L-2 3 6.3 2860 83.0 0.87 2.2 7.5 2.3
MS112M-2 4 8.1 2880 85.0 0.88 2.2 7.5 2.3
MS132S1-2 5.5 11.0 2900 86.0 0.88 2.2 7.5 2.3
MS132S2-2 7.5 14.9 2900 87.0 0.88 2.2 7.5 2.3
MS160M1-2 11 21.3 2930 88.0 0.89 2.2 7.5 2.3
MS160M2-2 15 28.8 2930 89.0 0.89 2.2 7.5 2.3
MS160L-2 18.5 34.7 2930 90.0 0.90 2.2 7.5 2.3
Synchronous speed 1500r/min
MS63M1-4 0.12 0.44 1310 57.0 0.72 2.1 4.4 2.2
MS63M2-4 0.18 0.62 1310 60.0 0.73 2.1 4.4 2.2
MS71M1-2 0.25 0.79 1330 65.0 0.74 2.1 5.2 2.2
MS71M2-4 0.37 1.12 1330 67.0 0.75 2.1 5.2 2.2
MS80M1-4 0.55 1.6 1390 71.0 0.75 2.4 5.2 2.3
MS80M2-4 0.75 2.0 1390 73.0 0.76 2.3 6.0 2.3
MS90S-4 1.1 2.9 1390 75.0 0.77 2.3 6.0 2.3
MS90L-4 1.5 3.7 1390 78.0 0.79 2.3 6.0 2.3
MS100L1-4 2.2 5.2 1410 80.0 0.81 2.3 7.0 2.3
MS100L2-4 3 6.8 1410 82.0 0.82 2.3 7.0 2.3
MS112M-4 4 8.8 1440 84.0 0.82 2.3 7.0 2.3
MS132S-4 5.5 11.8 1440 85.0 0.83 2.3 7.0 2.3
MS132M-4 7.5 15.6 1440 87.0 0.84 2.3 7.0 2.3
MS160M-4 11 22.3 1460 88.0 0.84 2.2 7.0 2.3
MS160L-4 15 30.1 1460 89.0 0.85 2.2 7.5 2.3
Synchronous speed 1000r/min
MS71M1-6 0.18 0.74 850 56.0 0.66 1.9 4.0 2.0
MS71M2-6 0.25 0.95 850 59.0 0.68 1.9 4.0 2.0
MS80M1-6 0.37 1.3 885 62.0 0.70 1.9 4.7 2.0
MS80M2-6 0.55 1.8 885 65.0 0.72 1.9 4.7 2.1
MS90S-6 0.75 2.3 910 69.0 0.72 2.0 5.5 2.1
MS90L-6 1.1 3.2 910 72.0 0.73 2.0 5.5 2.1
MS100L-6 1.5 3.9 920 76.0 0.75 2.0 5.5 2.1
MS112M-6 2.2 5.6 935 79.0 0.76 2.0 6.5 2.1
MS132S-6 3 7.4 960 81.0 0.76 2.1 6.5 2.1
MS132M1-6 4 9.8 960 82.0 0.76 2.1 6.5 2.1
MS132M2-6 5.5 12.9 965 84.0 0.77 2.1 6.5 2.1
MS160M-6 7.5 17.2 970 86.0 0.77 2.0 6.5 2.1
MS160L-6 11 24.2 970 87.5 0.78 2.0 6.5 2.1
Synchronous speed 750r/min
MS80M1-8 0.18 0.88 645 51.0 0.61 1.8 3.3 1.9
MS80M2-8 0.25 1.15 645 54.0 0.61 1.8 3.3 1.9
MS90S-8 0.37 1.49 670 62.0 0.61 1.8 4.0 1.9
MS90L-8 0.55 2.17 670 63.0 0.61 1.8 4.0 2.0
MS100L1-8 0.75 2.4 680 71.0 0.67 1.8 4.0 2.0
MS100L2-8 1.1 3.4 680 73.0 0.69 1.8 5.0 2.0
MS112M-8 1.5 4.4 690 75.0 0.69 1.8 5.0 2.0
MS132S-8 2.2 6 705 78.0 0.71 1.8 6.0 2.0
MS132M-8 3 7.9 705 79.0 0.73 1.8 6.0 2.0
MS160M1-8 4 10.3 720 81.0 0.73 1.9 6.0 2.0
MS160M2-8 5.5 13.6 720 83.0 0.74 2.0 6.0 2.0
MS160L-8 7.5 17.8 720 85.5 0.75 2.0 6.0 2.0

 

Frame  The number of poles                                         Installation dimensions         Dimensions
A B C D E F G H M N P R S T K Flange
Number of holes
AB AC AD HD HF L
63M 2.4 110 80 40 11 23 4 8.5 63 75 60 90 0 M5 2.5 7 4 135 130 70 180 130 230
71M 2.4.6 112 90 45 14 30 5 11 71 85 70 105 0 M6 2.5 7 4 150 145 80 195 145 255
80M 2.4.6.8 125 100 50 19 40 6 15.5 80 100 80 120 0 M6 3 10 4 165 175 145 214 185 295
90S 2.4.6.8 140 100 56 24 50 8 20 90 115 95 140 0 M8 3 10 4 180 195 155 250 195 320
90L 2.4.6.8 140 125 56 24 50 8 20 90 115 95 140 0 M8 3 10 4 180 195 155 250 195 345
100L 2.4.6.8 160 140 63 28 60 8 24 100 130 110 160 0 M8 3.5 12 4 205 215 180 270 245 385
112M 2.4.6.8 190 140 70 28 60 8 24 112 130 110 160 0 M8 3.5 12 4 230 240 190 300 265 400

 

Frame number The number of poles         Installation dimensions Dimensions
A B C D E F G H M N P R S T K AB AC AD HD HF L
63M 2.4 100 80 40 11 23 4 8.5 63 115 95 140 0 10 3 7 135 130 70 180 130 230
71M 2.4.6 112 90 45 14 30 5 11 71 130 110 160 0 10 3.5 7 150 145 80 195 145 255
80M 2.4.6.8 125 100 50 19 40 6 15.5 80 165 130 200 0 12 3.5 10 165 175 145 220 185 295
90S 2.4.6.8 140 100 56 24 50 8 20 90 165 130 200 0 12 3.5 10 180 195 155 250 195 320
90L 2.4.6.8 140 125 56 24 50 8 20 90 165 130 200 0 12 3.5 10 180 195 155 250 195 345
100L 2.4.6.8 160 140 63 28 60 8 24 100 215 180 250 0 15 4 12 205 215 180 270 245 385
112M 2.4.6.8 190 140 70 28 60 8 24 112 215 180 250 0 15 4 12 230 240 190 300 265 400
132S 2.4.6.8 216 140 89 38 80 10 33 132 265 230 300 0 15 4 12 270 275 210 345 315 470
132M 2.4.6.8 216 170 89 38 80 10 33 132 265 230 300 0 15 4 12 240 275 210 345 315 510
160M 2.4.6.8 254 210 108 42 110 12 37 160 300 250 350 0 19 5 15 320 330 255 420 385 615
160L 2.4.6.8 254 254 108 42 110 12 37 160 300 250 350 0 19 5 15 320 330 255 420 385 670

 

Installation structure type

Common installation structure type, and the applicable frame size is shown in the table below

Frame number Installation dimensions Dimensions
B3 B5 B35 V1 V3 V5 V6 B6 B7 B8 V15 V36 B14 B34 V18
63~112
132~160

Note: “√” indicates the type of structure that can be manufactured

PRODCUTION DETAILS 

 
FACTORY OUTLINED LOOKING :

ADVANTAGE:
Pre-sales service: 

•We are a sales team, with all technical support from engineer team.
•We value every inquiry sent to us, ensure quick competitive offer within 24 hours.
•We cooperate with customer to design and develop the new products. Provide all necessary document.

After-sales service:
•We respect your feed back after receive the motors.
•We provide 1years warranty after receipt of motors..
•We promise all spare parts available in lifetime use.
•We loge your complain within 24 hours. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Power Source: AC Motor
Starting Mode: Direct Online Starting
Speed: Low Speed
Function: Control, Driving
Voltage: 220/380V,380V,415V
Frequency: 50Hz,60Hz
Samples:
US$ 200/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

gear motor

Are gear motors suitable for both heavy-duty industrial applications and smaller-scale uses?

Yes, gear motors are suitable for both heavy-duty industrial applications and smaller-scale uses. Their versatility and ability to provide torque multiplication make them valuable in a wide range of applications. Here’s a detailed explanation of why gear motors are suitable for both types of applications:

1. Heavy-Duty Industrial Applications:

Gear motors are commonly used in heavy-duty industrial applications due to their robustness and ability to handle high loads. Here are the reasons why they are suitable for such applications:

  • Torque Multiplication: Gear motors are designed to provide high torque output, making them ideal for applications that require substantial force to move or operate heavy machinery, conveyors, or equipment.
  • Load Handling: Industrial settings often involve heavy loads and demanding operating conditions. Gear motors, with their ability to handle high loads, are well-suited for tasks such as lifting, pulling, pushing, or driving heavy materials or equipment.
  • Durability: Heavy-duty industrial applications require components that can withstand harsh environments, frequent use, and demanding operating conditions. Gear motors are typically constructed with durable materials and designed to withstand heavy vibrations, shock loads, and temperature variations.
  • Speed Reduction: Many industrial processes require the reduction of motor speed to achieve the desired output speed. Gear motors offer precise speed reduction capabilities through gear ratios, allowing for optimal control and operation of machinery and equipment.

2. Smaller-Scale Uses:

While gear motors excel in heavy-duty industrial applications, they are also suitable for smaller-scale uses across various industries and applications. Here’s why gear motors are well-suited for smaller-scale uses:

  • Compact Size: Gear motors are available in compact sizes, making them suitable for applications with limited space or small-scale machinery, devices, or appliances.
  • Torque and Power Control: Even in smaller-scale applications, there may be a need for torque multiplication or precise power control. Gear motors can provide the necessary torque and power output for tasks such as precise positioning, controlling speed, or driving small loads.
  • Versatility: Gear motors come in various configurations, such as parallel shaft, planetary, or worm gear designs, offering flexibility to match specific requirements. They can be adapted to different applications, including robotics, medical devices, automotive systems, home automation, and more.
  • Efficiency: Gear motors are designed to be efficient, converting the electrical input power into mechanical output power with minimal losses. This efficiency is advantageous for smaller-scale applications where energy conservation and battery life are critical.

Overall, gear motors are highly versatile and suitable for both heavy-duty industrial applications and smaller-scale uses. Their ability to provide torque multiplication, handle high loads, offer precise speed control, and accommodate various sizes and configurations makes them a reliable choice in a wide range of applications. Whether it’s powering large industrial machinery or driving small-scale automation systems, gear motors provide the necessary torque, control, and durability required for efficient operation.

gear motor

Are there environmental benefits to using gear motors in certain applications?

Yes, there are several environmental benefits associated with the use of gear motors in certain applications. Gear motors offer advantages that can contribute to increased energy efficiency, reduced resource consumption, and lower environmental impact. Here’s a detailed explanation of the environmental benefits of using gear motors:

1. Energy Efficiency:

Gear motors can improve energy efficiency in various ways:

  • Torque Conversion: Gear reduction allows gear motors to deliver higher torque output while operating at lower speeds. This enables the motor to perform tasks that require high torque, such as lifting heavy loads or driving machinery with high inertia, more efficiently. By matching the motor’s power characteristics to the load requirements, gear motors can operate closer to their peak efficiency, minimizing energy waste.
  • Controlled Speed: Gear reduction provides finer control over the motor’s rotational speed. This allows for more precise speed regulation, reducing the likelihood of energy overconsumption and optimizing energy usage.

2. Reduced Resource Consumption:

The use of gear motors can lead to reduced resource consumption and environmental impact:

  • Smaller Motor Size: Gear reduction allows gear motors to deliver higher torque with smaller, more compact motors. This reduction in motor size translates to reduced material and resource requirements during manufacturing. It also enables the use of smaller and lighter equipment, which can contribute to energy savings during operation and transportation.
  • Extended Motor Lifespan: The gear mechanism in gear motors helps reduce the load and stress on the motor itself. By distributing the load more evenly, gear motors can help extend the lifespan of the motor, reducing the need for frequent replacements and the associated resource consumption.

3. Noise Reduction:

Gear motors can contribute to a quieter and more environmentally friendly working environment:

  • Noise Dampening: Gear reduction can help reduce the noise generated by the motor. The gear mechanism acts as a noise dampener, absorbing and dispersing vibrations and reducing overall noise emission. This is particularly beneficial in applications where noise reduction is important, such as residential areas, offices, or noise-sensitive environments.

4. Precision and Control:

Gear motors offer enhanced precision and control, which can lead to environmental benefits:

  • Precise Positioning: Gear motors, especially stepper motors and servo motors, provide precise positioning capabilities. This accuracy allows for more efficient use of resources, minimizing waste and optimizing the performance of machinery or systems.
  • Optimized Control: Gear motors enable precise control over speed, torque, and movement. This control allows for better optimization of processes, reducing energy consumption and minimizing unnecessary wear and tear on equipment.

In summary, using gear motors in certain applications can have significant environmental benefits. Gear motors offer improved energy efficiency, reduced resource consumption, noise reduction, and enhanced precision and control. These advantages contribute to lower energy consumption, reduced environmental impact, and a more sustainable approach to power transmission and control. When selecting motor systems for specific applications, considering the environmental benefits of gear motors can help promote energy efficiency and sustainability.

gear motor

In which industries are gear motors commonly used, and what are their primary applications?

Gear motors find widespread use in various industries due to their versatility, reliability, and ability to provide controlled mechanical power. They are employed in a wide range of applications that require precise power transmission and speed control. Here’s a detailed explanation of the industries where gear motors are commonly used and their primary applications:

1. Robotics and Automation:

Gear motors play a crucial role in robotics and automation industries. They are used in robotic arms, conveyor systems, automated assembly lines, and other robotic applications. Gear motors provide the required torque, speed control, and directional control necessary for the precise movements and operations of robots. They enable accurate positioning, gripping, and manipulation tasks in industrial and commercial automation settings.

2. Automotive Industry:

The automotive industry extensively utilizes gear motors in various applications. They are used in power windows, windshield wipers, HVAC systems, seat adjustment mechanisms, and many other automotive components. Gear motors provide the necessary torque and speed control for these systems, enabling smooth and efficient operation. Additionally, gear motors are also utilized in electric and hybrid vehicles for powertrain applications.

3. Manufacturing and Machinery:

Gear motors find wide application in the manufacturing and machinery sector. They are used in conveyor belts, packaging equipment, material handling systems, industrial mixers, and other machinery. Gear motors provide reliable power transmission, precise speed control, and torque amplification, ensuring efficient and synchronized operation of various manufacturing processes and machinery.

4. HVAC and Building Systems:

In heating, ventilation, and air conditioning (HVAC) systems, gear motors are commonly used in damper actuators, control valves, and fan systems. They enable precise control of airflow, temperature, and pressure, contributing to energy efficiency and comfort in buildings. Gear motors also find applications in automatic doors, blinds, and gate systems, providing reliable and controlled movement.

5. Marine and Offshore Industry:

Gear motors are extensively used in the marine and offshore industry, particularly in propulsion systems, winches, and cranes. They provide the required torque and speed control for various marine operations, including steering, anchor handling, cargo handling, and positioning equipment. Gear motors in marine applications are designed to withstand harsh environments and provide reliable performance under demanding conditions.

6. Renewable Energy Systems:

The renewable energy sector, including wind turbines and solar tracking systems, relies on gear motors for efficient power generation. Gear motors are used to adjust the rotor angle and position in wind turbines, optimizing their performance in different wind conditions. In solar tracking systems, gear motors enable the precise movement and alignment of solar panels to maximize sunlight capture and energy production.

7. Medical and Healthcare:

Gear motors have applications in the medical and healthcare industry, including in medical equipment, laboratory devices, and patient care systems. They are used in devices such as infusion pumps, ventilators, surgical robots, and diagnostic equipment. Gear motors provide precise control and smooth operation, ensuring accurate dosing, controlled movements, and reliable functionality in critical medical applications.

These are just a few examples of the industries where gear motors are commonly used. Their versatility and ability to provide controlled mechanical power make them indispensable in numerous applications requiring torque amplification, speed control, directional control, and load distribution. The reliable and efficient power transmission offered by gear motors contributes to the smooth and precise operation of machinery and systems in various industries.

China Hot selling MS Three Phase Asynchronous AC Induction Electric Motor For Gear Reducer Fan Blower   with Good quality China Hot selling MS Three Phase Asynchronous AC Induction Electric Motor For Gear Reducer Fan Blower   with Good quality
editor by CX 2024-02-14

China Custom CE 0.12kw-315kw Y2 Series Three Phase Asynchronous Electric Motor AC Motor Induction Motor for Water Pump, Air Compressor, Gear Reducer Fan Blower vacuum pump distributors

Product Description

We, GOGOGO Mechanical&Electrical Co.,Ltd specialize in high quality energy-efficient electric motors. The combination of the best available materials, high quality sheet metal and the right amount of copper in the rotor/stator makes GOGOGO’s electric motors highly energy-efficient.

We design our electric motors to fit and match our customer’s requirements at our production site. The electric motors can be supplemented with a range of options and accessories or modified with a special design to endure any environment.
 

Electric motors account for a large part of the electricity used. If we look at the world, electric motors account for about 65 percent of the electricity used in industry. To reduce this use of electricity, there are legal requirements regarding the efficiency of electric motors manufactured in the EU, or exported into the EU.

Three-phase, single-speed asynchronous motors are covered by the requirements today. Asynchronous motors are the most common type of motor and account for 90 percent of the electricity consumption of all electric motors in the power range 0.75 – 375 kW.

According to that standard, the energy efficiency classes have the designations IE1, IE2, IE3 and IE4, where IE4 has the highest efficiency.

 

Revision of the standard

A revision of the standard was decided by the Ecodesign Committee in 2019. The revision was published on October 1, 2019. The following will apply:

For electric motors

From July 1, 2571

2-, 4-, 6- and 8-pole motors from 0.75 – 1000 kW (previously up to 375kW) are included in efficiency class IE3.

Motors within the range 0.12 – 0.75 kW must meet efficiency class IE2.

The previous possibility to replace IE3 motors with an IE2 motor with frequency drive disappears.

From July 1, 2571

For 2-, 4-, 6- and 8-pole motors from 0.12 – 1000 kW, the efficiency class IE2 now also applies to Ex eb certified motors with high safety.

Single phase motors with greater power than 0.12 kW are covered by the corresponding IE2 class.

The higher efficiency class IE4 applies to 2, 4 and 6-pole motors between 75 – 200 kW.

For frequency inverters

From July 1, 2571

For use with electric motors with power from 0.12 – 1000 kW, the frequency inverter must pass efficiency class IE2 specially designed for inverters.

Current requirements according to the Directive

Since 16 June, 2011 it is prohibited to place electric motors below energy efficiency class IE2 on the market, or to put them into service in the EU.

Since January 1, 2015, electric motors within the range 7.5 – 375 kW (2-, 4-, and 6-pole) must meet the requirements for IE3, or IE2 if the latter is combined with frequency inverters for speed control. The legal requirement thus provides 2 options.

From January 1, 2017, the requirements were tightened so that all motors 0.75 – 375 kW (2-, 4-, and 6-pole) must meet the requirements for IE3, or IE2 if they are combined with frequency inverters.

Exemptions from the current directive

  • Operation other than S1 (continuous drive) or S3 (intermittent drive) with a nominal cyclicity factor of 80 percent or lower.
  • Made for assembly with frequency inverters (integral motors).
  • Electric motors made for use in liquid.
  • Electric motors that are fully integrated into a product (e.g. a gear, pump, fan or compressor) where the energy performance is not tested independently of the product.
  • Brake motors

Electric motors intended for operation exclusively:

  • At altitudes exceeding 4 000 CHINAMFG above sea level.
  • If ambient air temperatures exceed 60°C.
  • Where maximum operating temperature exceeds 400°C.
  • Where ambient air temperatures are less than -30°C for all motors, or less than 0°C for motors with water cooling.
  • In explosive atmospheres (as defined in Directive 94/9 / EC 9)

The requirements do not apply to ships or other means of transport that carry goods or persons, since there must be specially designed engines for this purpose. (If the same mobile conveyor belt is used on ships as well as on land, the rules apply).

Also, the requirements do not apply to repair of motors previously placed on the market, or put into service – unless the repair is so extensive that the product will in practice be brand new.

If the motor is to be further exported for use outside Europe, the requirements do not apply.

Some other requirements apply to water-cooled motors

We have our own design and development team, we can provide customers with standard AC electric motors, We can also customize the single phase/three phase motors according to the special needs of customers.    Currently our main motor products cover 3 – phase high – efficiency motors,general 3 – phase motors, single phase motors, etc.
The main motor ranges: IE3 / YE3, IE2 / YE2, IE1 / Y2, Y, YS, MS, YC, YL, YY, MC, MY, ML motors.
 American standard NEMA motors
Russian standard GOST ANP motors
ZheJiang type AEEF motors,YC motors

Why choose us?
Guarantee of our motors:18-24months
General elivery time:15-30days
Price of motors: Most reasonable during your all suppliers
Packing:Strong export cartons/wooden case/plywood cases/pallets
Payment way with your order: T/T,LC,DP,etc

Sample order: Acceptable
Shipment way: Sea ship,Air flight,Express way,Land transfer way.

If you are looking for new better supplier or purchase electric motors, please feel free contact us now.You will get all what you want. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial, Universal, Household Appliances, Power Tools
Operating Speed: Constant Speed
Number of Stator: Three-Phase
Samples:
US$ 30/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gear motor

What types of feedback mechanisms are commonly integrated into gear motors for control?

Gear motors often incorporate feedback mechanisms to provide control and improve their performance. These feedback mechanisms enable the motor to monitor and adjust its operation based on various parameters. Here are some commonly integrated feedback mechanisms in gear motors:

1. Encoder Feedback:

An encoder is a device that provides position and speed feedback by converting the motor’s mechanical motion into electrical signals. Encoders commonly used in gear motors include:

  • Incremental Encoders: These encoders provide information about the motor’s shaft position and speed relative to a reference point. They generate pulses as the motor rotates, allowing precise measurement of position and speed changes.
  • Absolute Encoders: Absolute encoders provide the precise position of the motor’s shaft within a full revolution. They do not require a reference point and provide accurate feedback even after power loss or motor restart.

2. Hall Effect Sensors:

Hall effect sensors use the principle of the Hall effect to detect the presence and strength of a magnetic field. They are commonly used in gear motors for speed and position sensing. Hall effect sensors provide feedback by detecting changes in the motor’s magnetic field and converting them into electrical signals.

3. Current Sensors:

Current sensors monitor the electrical current flowing through the motor’s windings. By measuring the current, these sensors provide feedback regarding the motor’s torque, load conditions, and power consumption. Current sensors are essential for motor control strategies such as current limiting, overcurrent protection, and closed-loop control.

4. Temperature Sensors:

Temperature sensors are integrated into gear motors to monitor the motor’s temperature. They provide feedback on the motor’s thermal conditions, allowing the control system to adjust the motor’s operation to prevent overheating. Temperature sensors are crucial for ensuring the motor’s reliability and preventing damage due to excessive heat.

5. Hall Effect Limit Switches:

Hall effect limit switches are used to detect the presence or absence of a magnetic field within a specific range. They are commonly employed as end-of-travel or limit switches in gear motors. Hall effect limit switches provide feedback to the control system, indicating when the motor has reached a specific position or when it has moved beyond the allowed range.

6. Resolver Feedback:

A resolver is an electromagnetic device used to determine the position and speed of a rotating shaft. It provides feedback by generating sine and cosine signals that correspond to the shaft’s angular position. Resolver feedback is commonly used in high-performance gear motors requiring accurate position and speed control.

These feedback mechanisms, when integrated into gear motors, enable precise control, monitoring, and adjustment of various motor parameters. By utilizing feedback signals from encoders, Hall effect sensors, current sensors, temperature sensors, limit switches, or resolvers, the control system can optimize the motor’s performance, ensure accurate positioning, maintain speed control, and protect the motor from excessive loads or overheating.

gear motor

What is the significance of gear reduction in gear motors, and how does it affect efficiency?

Gear reduction plays a significant role in gear motors as it enables the motor to deliver higher torque while reducing the output speed. This feature has several important implications for gear motors, including enhanced power transmission, improved control, and potential trade-offs in terms of efficiency. Here’s a detailed explanation of the significance of gear reduction in gear motors and its effect on efficiency:

Significance of Gear Reduction:

1. Increased Torque: Gear reduction allows gear motors to generate higher torque output compared to a motor without gears. By reducing the rotational speed at the output shaft, gear reduction increases the mechanical advantage of the system. This increased torque is beneficial in applications that require high torque to overcome resistance, such as lifting heavy loads or driving machinery with high inertia.

2. Improved Control: Gear reduction enhances the control and precision of gear motors. By reducing the speed, gear reduction allows for finer control over the motor’s rotational movement. This is particularly important in applications that require precise positioning or accurate speed control. The gear reduction mechanism enables gear motors to achieve smoother and more controlled movements, reducing the risk of overshooting or undershooting the desired position.

3. Load Matching: Gear reduction helps match the motor’s power characteristics to the load requirements. Different applications have varying torque and speed requirements. Gear reduction allows the gear motor to achieve a better match between the motor’s power output and the specific requirements of the load. It enables the motor to operate closer to its peak efficiency by optimizing the torque-speed trade-off.

Effect on Efficiency:

While gear reduction offers several advantages, it can also affect the efficiency of gear motors. Here’s how gear reduction impacts efficiency:

1. Mechanical Efficiency: The gear reduction process introduces mechanical components such as gears, bearings, and lubrication systems. These components introduce additional friction and mechanical losses into the system. As a result, some energy is lost in the form of heat during the gear reduction process. The efficiency of the gear motor is influenced by the quality of the gears, the lubrication used, and the overall design of the gear system. Well-designed and properly maintained gear systems can minimize these losses and optimize mechanical efficiency.

2. System Efficiency: Gear reduction affects the overall system efficiency by impacting the motor’s electrical efficiency. In gear motors, the motor typically operates at higher speeds and lower torques compared to a direct-drive motor. The overall system efficiency takes into account both the electrical efficiency of the motor and the mechanical efficiency of the gear system. While gear reduction can increase the torque output, it also introduces additional losses due to increased mechanical complexity. Therefore, the overall system efficiency may be lower compared to a direct-drive motor for certain applications.

It’s important to note that the efficiency of gear motors is influenced by various factors beyond gear reduction, such as motor design, control systems, and operating conditions. The selection of high-quality gears, proper lubrication, and regular maintenance can help minimize losses and improve efficiency. Additionally, advancements in gear technology, such as the use of precision gears and improved lubricants, can contribute to higher overall efficiency in gear motors.

In summary, gear reduction is significant in gear motors as it provides increased torque, improved control, and better load matching. However, gear reduction can introduce mechanical losses and affect the overall efficiency of the system. Proper design, maintenance, and consideration of application requirements are essential to optimize the balance between torque, speed, and efficiency in gear motors.

gear motor

How does the gearing mechanism in a gear motor contribute to torque and speed control?

The gearing mechanism in a gear motor plays a crucial role in controlling torque and speed. By utilizing different gear ratios and configurations, the gearing mechanism allows for precise manipulation of these parameters. Here’s a detailed explanation of how the gearing mechanism contributes to torque and speed control in a gear motor:

The gearing mechanism consists of multiple gears with varying sizes, tooth configurations, and arrangements. Each gear in the system engages with another gear, creating a mechanical connection. When the motor rotates, it drives the rotation of the first gear, which then transfers the motion to subsequent gears, ultimately resulting in the output shaft’s rotation.

Torque Control:

The gearing mechanism in a gear motor enables torque control through the principle of mechanical advantage. The gear system utilizes gears with different numbers of teeth, known as gear ratio, to adjust the torque output. When a smaller gear (pinion) engages with a larger gear (gear), the pinion rotates faster than the gear but exerts more force or torque. This results in torque amplification, allowing the gear motor to deliver higher torque at the output shaft while reducing the rotational speed. Conversely, if a larger gear engages with a smaller gear, torque reduction occurs, resulting in higher rotational speed at the output shaft.

By selecting the appropriate gear ratio, the gearing mechanism effectively adjusts the torque output of the gear motor to match the requirements of the application. This torque control capability is essential in applications that demand high torque for heavy lifting or overcoming resistance, as well as applications that require lower torque but higher rotational speed.

Speed Control:

The gearing mechanism also contributes to speed control in a gear motor. The gear ratio determines the relationship between the rotational speed of the input shaft (driven by the motor) and the output shaft. When a gear motor has a higher gear ratio (more teeth on the driven gear compared to the driving gear), it reduces the output speed while increasing the torque. Conversely, a lower gear ratio increases the output speed while reducing the torque.

By choosing the appropriate gear ratio, the gearing mechanism allows for precise speed control in a gear motor. This is particularly useful in applications that require specific speed ranges or variations, such as conveyor systems, robotic movements, or machinery that needs to operate at different speeds for different tasks. The speed control capability of the gearing mechanism enables the gear motor to match the desired speed requirements of the application accurately.

In summary, the gearing mechanism in a gear motor contributes to torque and speed control by utilizing different gear ratios and configurations. It enables torque amplification or reduction, depending on the gear arrangement, allowing the gear motor to deliver the required torque output. Additionally, the gear ratio also determines the relationship between the rotational speed of the input and output shafts, providing precise speed control. These torque and speed control capabilities make gear motors versatile and suitable for a wide range of applications in various industries.

China Custom CE 0.12kw-315kw Y2 Series Three Phase Asynchronous Electric Motor AC Motor Induction Motor for Water Pump, Air Compressor, Gear Reducer Fan Blower   vacuum pump distributorsChina Custom CE 0.12kw-315kw Y2 Series Three Phase Asynchronous Electric Motor AC Motor Induction Motor for Water Pump, Air Compressor, Gear Reducer Fan Blower   vacuum pump distributors
editor by CX 2024-02-01

China high quality Mini Electric Motor Cycloidal Helical Harmonic Gear Speed Reducer Transmission Gearbox gearbox assembly

Product Description

Product Description:

1. Flexspline is a hollow flanging standard cylinder structure.

2. There is a large-diameter hollow shaft hole in the middle of the cam of the wave generator. The internal design of the reducer has a support bearing.

3. It has a fully sealed structure and is easy to install. It is very suitable for occasions where the wire needs to be threaded from the center of the reducer.
 

Advantages:
1. High precision,high torque
2. Dedicated technical personnel can be on-the-go to provide design solutions
3. Factory direct sales fine workmanship durable quality assurance
4. Product quality issues have a one-year warranty time, can be returned for replacement or repair

Company profile:

 

HangZhou CZPT Technology Co., Ltd. established in 2014, is committed to the R & D plant of high-precision transmission components. At present, the annual production capacity can reach 45000 sets of harmonic reducers. We firmly believe in quality first. All links from raw materials to finished products are strictly supervised and controlled, which provides a CZPT foundation for product quality. Our products are sold all over the country and abroad.

The harmonic reducer and other high-precision transmission components were independently developed by the company. Our company spends 20% of its sales every year on the research and development of new technologies in the industry. There are 5 people in R & D.

Our advantage is as below:

1.7 years of marketing experience

2. 5-person R & D team to provide you with technical support

3. It is sold at home and abroad and exported to Turkey and Ireland

4. The product quality is guaranteed with a one-year warranty

5. Products can be customized

Strength factory:

Our plant has an entire campus The number of workshops is around 300 Whether it’s from the production of raw materials and the procurement of raw materials to the inspection of finished products, we’re doing it ourselves. There is a complete production system

HST-III Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

HSG Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 9 0.9 46 4.7 14000 8500 ≤20 15000
80 10 1 30 3.1 14 1.4 61 6.2
100 10 1 36 3.7 14 1.4 70 7.2
17 50 21 2.1 44 4.5 34 3.4 91 9 10000 7300 ≤20 20000
80 29 2.9 56 5.7 35 3.6 113 12
100 31 3.2 70 7.2 51 5.2 143 15
20 50 33 3.3 73 7.4 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.8 61 6.2 165 17
100 52 5.3 107 10.9 64 6.5 191 20
120 52 5.3 113 11.5 64 6.5 191 20
160 52 5.3 120 12.2 64 6.5 191 20
25 50 51 5.2 127 13 72 7.3 242 25 7500 5600 ≤20 20000
80 82 8.4 178 18 113 12 332 34
100 87 8.9 204 21 140 14 369 38
120 87 8.9 217 22 140 14 395 40
32 50 99 10 281 29 140 14 497 51 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 75
100 178 18 433 44 281 29 841 86
40 100 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000

Exhibitions:
Application case:

FQA:
Q: What should I provide when I choose a gearbox/speed reducer?
A: The best way is to provide the motor drawing with parameters. Our engineer will check and recommend the most suitable gearbox model for your reference.
Or you can also provide the below specification as well:
1) Type, model, and torque.
2) Ratio or output speed
3) Working condition and connection method
4) Quality and installed machine name
5) Input mode and input speed
6) Motor brand model or flange and motor shaft size

Application: Motor, Machinery, Agricultural Machinery, Hst-I
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Types of Gearboxes

There are several types of gearboxes. Some are known as helical gear reducers, while others are called planetary gearboxes. The article also discusses Continuously Variable Transmission (CVT) and helical gear reducer. If you are interested in purchasing a new gearbox, make sure to read our articles on these different types. If you are confused, consider reading our articles on planetary gearboxes and helical gear reducers.

planetary gearbox

The planetary gearbox has several advantages. Its compact design and light weight allows it to transmit high torques while remaining quiet. The gears are connected to one another through a carrier, which is typically fixed and helps transmit torques to the output shaft. Its planetary structure arrangement also reduces backlash and provides high rigidity, which is important for quick start and stop cycles and rotational direction change. Depending on the design and performance desired, planetary gearboxes are categorized into three main types:
The type of planetary gears used in a given application determines the overall cost of the unit. Manufacturers offer a range of prices, and they can help you determine which gearbox is right for your needs. You should also ask a manufacturer for the cost of a planetary gearbox. By asking about price and specs, you can avoid wasting money and time on a planetary gearbox that does not perform up to its potential.
A planetary gearbox is probably installed in your new car’s automatic transmission. For more information, consult your owner’s manual or call the dealer’s service department. This type of gearbox is more complex than other types of gearboxes, so if you don’t know much about them, do an internet search for “planetary gearbox.”
The teeth of a planetary gearbox are formed by the stepping motion of two gears: the sun gear and the inner ring. The sun gear is the input, while the planetary gears rotate around the sun gear. Their ratio depends on the number of teeth and the space between the planets. If you have a 24 tooth sun gear, the planetary gears’ ratio will be -3/2. The sun gear is also attached to the axle.
Another advantage of a planetary gear system is that it can generate high torques. The load is shared among multiple planet gears. This makes the gears more resilient to damage. A planetary gearbox can be as high as 332,000 Nm, and can be used in vehicles and industrial applications requiring medium to high torque. A planetary gear system is a great alternative to a traditional transmission. So, how does it work?

helical gearbox

The main difference between the helical gearbox and the spur gear is the center distance between the teeth. The helical gearbox has a larger pitch circle than the spur gear and thus requires a radial module. In addition, the two types of gears can only be made with the same tooth-cutting tool as the spur gear. However, the helical gearbox is more efficient in terms of production costs.
The helical gearbox is a low-power consumption, compact type of gearbox that is used for a wide range of industrial applications. They are highly durable and withstand high loads with utmost efficiency. The helical gearbox can be manufactured in cast steel and iron for small and medium units. This type of gearbox is also commonly used for crushers, conveyors, coolers, and other applications that need low power.
The helical gear has many advantages over the spur gear. It produces less noise. It has less friction and is less likely to wear out. It is also quieter than spur gears. This is because multiple teeth are in mesh. Because the teeth are in mesh, the load is distributed over a larger area, resulting in a smoother transition between gears. The reduction in noise and vibration reduces the risk of damaging the gear.
The helical gear’s axial excitation force is obtained using a linearized equation of motion in the rotational direction. The damping coefficient of the equation is 0.07. The helical gear is made up of a steel shaft with a diameter of 20 mm and a 5 mm thick aluminum plate. The stiffness of the bearing is 6.84 x 107 N/m. The damping force of the plate is 2,040 kg/m2/s.
The worm gearbox has a better efficiency ratio than the helical one, but it is less efficient in low-ratio applications. In general, worm gearboxes are more efficient than helical gearboxes, although there are some exceptions to this rule. A helical gearbox is better for applications that require high torque. It may also be more economical in the long run. If you are considering a helical gearbox, consider the advantages it has over worm gearboxes.
gearbox

helical gear reducer

A helical gear reducer for a machine’s gearbox is an integral component of the drive system. This unit amplifies torque and controls speed and, therefore, compliments the engine by rotating slower than the engine’s input shaft. A helical gear reducer is a compact gearbox component that is used in industrial applications. A variety of sizes is available to suit various machine configurations. The following sections will discuss some of the different types available.
Designed by experts and engineers, a helical gear reducer is a surprisingly small and light gear that satisfies the needs of many machine applications. It features a large transmission torque, a low starting and running speed, and a fine classification of transmission ratios. A helical gear reducer is lightweight and easily connected to other gears, and it features a high technical content.
In order to avoid errors and poor performance, regular maintenance is a must. The proper lubrication of the gear reducer can minimize failures, errors, and poor performance. Every gear reducer manufacturer sells a suitable lubricant, which must match the properties of the machine’s drive mechanism. It is also advisable to check the lubrication regularly to avoid any deterioration of the unit’s performance.
While the worm gearbox may be better for applications where torque is high, the helical gear reducer offers greater efficiency at lower cost. Although worm gearboxes may be cheaper initially, they are less effective at higher ratios. Even if the worm gear is more expensive to buy, it still offers 94% efficiency, which makes it more cost-effective. There are some significant advantages to both types of gearboxes.
The main advantage of a helical gear reducer over a spur gear is its smoother operation. Unlike spur gears, which have teeth that are straight, helical gears have angled teeth that gradually engage with each other. This helps ensure that the gear does not grind or make excessive noise when it turns. Additionally, they are less commonly used in automation and precision machinery. They are often used in industrial applications.
gearbox

Continuously variable transmission

A Continuously Variable Transmission (CVT) is an automatic transmission that can run through a vast number of gears. Unlike a standard automatic transmission, it can run at any speed, even at a low rev. The CVT is also capable of running at infinitely low gears. Its basic function is to provide different torque ratios to the engine. In addition to delivering power, CVTs have other benefits.
One of the major advantages of a CVT is its simplicity. Its simplicity translates into fewer moving parts, which means less maintenance. The CVT’s simplicity also means that it can handle a wide variety of different types of road conditions and driving styles. In addition to being a great alternative to a traditional automatic transmission, CVTs can be used on many other types of vehicles, including tractors, snowmobiles, motor scooters, and power tools.
A CVT is much smoother than a conventional automatic transmission. It never has to hunt for a gear. It also responds well to throttle inputs and speed changes. Both of these technologies are available on many modern vehicles, including the Nissan Rogue and Mazda CX-5. It’s important to note that each of these transmissions has its pros and cons. So, if you’re looking for a car with a CVT, make sure to read the reviews. They’ll help you decide which transmission is right for you.
Another advantage of a CVT is its fuel efficiency. Many cars now feature CVTs, and they’re becoming increasingly popular with automakers. In addition to fuel efficiency, most cars with CVTs also have a smoother ride. There’s no more sudden downshifts or gear hunting. This makes driving a lot easier. And, the added benefits of smoother driving make CVTs the ideal choice for many drivers.
Although a CVT is more common among Japanese car manufacturers, you’ll find CVTs on European car models as well. The Mercedes-Benz A-Class, B-Class, and Megane are some examples of vehicles that use this technology. Before making a decision, consider the reliability of the model in question. Consumer Reports is a good resource for this. It also offers a history of use and reliability for every type of car, including the Honda Accord.

China high quality Mini Electric Motor Cycloidal Helical Harmonic Gear Speed Reducer Transmission Gearbox   gearbox assembly	China high quality Mini Electric Motor Cycloidal Helical Harmonic Gear Speed Reducer Transmission Gearbox   gearbox assembly
editor by CX 2023-04-25

China Custom Three Phase Asynchronous AC Induction Electric Gear Reducer Fan Blower Vacuum Air Compressor Water Pump CZPT Industry Machine Motor near me factory

Merchandise Description

Item Description



 

Item Parameters

Features:
1) Dimensions: 60mm, 70mm, 80mm, 90mm,104mm, 120mm.
two) Energy: 25W, 40W, 60W, 90W,120W, 140W, 180W,
200W, 250W, 300W, 400W, 550W, 750W.
three) Voltage(V): 110V/220V/380V.
4) Reduction ratio: 3- 200K.

Business Profile

HangZhou Welldone Transmission CZPT Co., Ltd. specializes in manufacturing various types of modest and medium-sized equipment, 3 phase asynchronous motor, this sort of as DC motor, AC motor, reducer, planetary reducer, servo reducer, and so on. We have skilled gear tester (equipment all-round inspection), CZPT hardness tester, Rockwell hardness tester (check hardness yet again to ensure use resistance), radial runout detection (detect motor operating in and harmony, so that the motor can reduce put on and no noise during substantial-pace procedure), face up to voltage tester (detect leakage, higher than CZPT voltage, no leakage), inter switch tester, surge check motor stator winding turn to flip insulation, thickened coil, exact same electricity torque output, torque is higher.

The “Welldone” equipment reducer created by our company sells well in provinces, municipalities and autonomous regions of the region. It is extensively utilized in metallurgy, mining, lifting, transportation, petroleum, chemical, textile, pharmaceutical, food, mild sector, grain, oil, feed and other industries, and is deeply trusted by buyers.
Welcome new and previous customers to visit and guide.

FAQ

Q: How to pick a suitable motor or gearbox?
A: If you have motor pictures or drawings to demonstrate us, or you have in depth requirements, these kinds of as, voltage, speed, torque, motor size, functioning manner of the motor, required life span and sounds level and so forth, make sure you do not hesitate to let us know, then we can advocate ideal motor for every your request accordingly.

Q: Do you have a customized provider for your common motors or gearboxes?
A: Sure, we can customize for each your request for the voltage, velocity, torque and shaft dimension.

Q: What is your lead time?
A: Usually talking, our typical standard merchandise will require 2-7days, a little bit more time for custom-made merchandise. It will rely on the specific orders.

Simply click right here for deep conversation.

Dynamic Modeling of a Planetary Motor

A planetary gear motor is composed of a series of gears rotating in excellent synchrony, permitting them to supply torque in a larger output ability than a spur equipment motor. In contrast to the planetary motor, spur gear motors are less complicated to create and value much less, but they are much better for applications demanding reduced torque output. That is due to the fact every single equipment carries the entire load. The subsequent are some essential variances between the two types of gearmotors.

planetary equipment program

A planetary equipment transmission is a variety of gear system that transfers torque from a single supply to another, generally a rotary motion. In addition, this sort of gear transmission demands dynamic modeling to look into its durability and dependability. Preceding scientific studies incorporated equally uncoupled and coupled meshing models for the evaluation of planetary gear transmission. The mixed design considers equally the shaft structural stiffness and the bearing assistance stiffness. In some apps, the flexible planetary equipment might influence the dynamic response of the technique.
In a planetary gear device, the axial finish area of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of stopping international particles from entering the planetary equipment system. A planetary gear gadget is a wonderful choice if your planetary motor’s velocity is large. A substantial-quality planetary gear program can supply a outstanding performance than traditional programs.
A planetary equipment method is a sophisticated system, involving three shifting backlinks that are linked to every single other by way of joints. The sunshine equipment acts as an input and the earth gears act as outputs. They rotate about their axes at a ratio determined by the number of enamel on every single equipment. The sun gear has 24 tooth, even though the world gears have three-quarters that ratio. This ratio can make a planetary motor very efficient.
Motor

planetary equipment prepare

To forecast the cost-free vibration response of a planetary motor gear train, it is vital to build a mathematical design for the system. Beforehand, static and dynamic types had been employed to study the habits of planetary motor equipment trains. In this research, a dynamic product was designed to look into the results of essential design parameters on the vibratory reaction. Crucial parameters for planetary gear transmissions incorporate the composition stiffness and mesh stiffness, and the mass and spot of the shaft and bearing supports.
The design and style of the planetary motor equipment practice is composed of several phases that can run with variable input speeds. The style of the equipment train allows the transmission of higher torques by dividing the load throughout several planetary gears. In addition, the planetary gear teach has a number of teeth which mesh simultaneously in operation. This layout also allows for higher efficiency and transmittable torque. Listed here are some other benefits of planetary motor equipment trains. All these advantages make planetary motor equipment trains one of the most popular varieties of planetary motors.
The compact footprint of planetary gears makes it possible for for exceptional warmth dissipation. Higher speeds and sustained performances will demand lubrication. This lubricant can also lessen sound and vibration. But if these attributes are not appealing for your application, you can choose a distinct gear variety. Alternatively, if you want to maintain higher overall performance, a planetary motor gear teach will be the very best choice. So, what are the positive aspects of planetary motor gears?

planetary gear teach with fastened provider practice ratio

The planetary gear train is a typical type of transmission in different equipment. Its primary rewards are high performance, compactness, massive transmission ratio, and power-to-excess weight ratio. This kind of equipment train is a mixture of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial power and substantial load carrying ability. Herringbone planetary gears are commonly utilised in hefty machinery and transmissions of large vehicles.
To use a planetary equipment practice with a fastened provider train ratio, the 1st and next planets need to be in a provider position. The 1st world is rotated so that its tooth mesh with the sun’s. The second planet, nonetheless, are not able to rotate. It should be in a carrier position so that it can mesh with the solar. This requires a high degree of precision, so the planetary equipment practice is normally created of numerous sets. A minor examination will simplify this layout.
The planetary equipment prepare is produced up of 3 components. The outer ring equipment is supported by a ring equipment. Every gear is positioned at a distinct angle relative to a single one more. This allows the gears to rotate at a fastened rate while transferring the motion. This style is also well-known in bicycles and other little cars. If the planetary gear teach has several stages, numerous ring gears may be shared. A stationary ring gear is also utilised in pencil sharpener mechanisms. Earth gears are extended into cylindrical cutters. The ring equipment is stationary and the earth gears rotate about a sun axis. In the circumstance of this style, the outer ring equipment will have a -3/2 world equipment ratio.
Motor

planetary gear practice with zero helix angle

The torque distribution in a planetary equipment is skewed, and this will significantly reduce the load carrying capacity of a needle bearing, and therefore the existence of the bearing. To far better comprehend how this can affect a gear teach, we will look at two scientific studies performed on the load distribution of a planetary gear with a zero helix angle. The first study was completed with a hugely specialized plan from the bearing producer INA/FAG. The purple line signifies the load distribution along a needle roller in a zero helix equipment, whilst the environmentally friendly line corresponds to the same distribution of hundreds in a fifteen diploma helix angle gear.
One more approach for identifying a gear’s helix angle is to think about the ratio of the solar and planet gears. Even though the solar equipment is typically on the enter aspect, the world gears are on the output aspect. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates forty five degrees clockwise. Equally gears are attached to pins that help the world gears. In the determine under, you can see the tangential and axial equipment mesh forces on a planetary equipment prepare.
Another strategy employed for calculating electricity reduction in a planetary equipment prepare is the use of an car transmission. This sort of gear offers well balanced overall performance in each energy efficiency and load ability. Even with the complexities, this approach supplies a much more exact analysis of how the helix angle has an effect on power loss in a planetary equipment teach. If you’re intrigued in minimizing the power reduction of a planetary gear train, read through on!

planetary gear prepare with spur gears

A planetary gearset is a sort of mechanical push method that employs spur gears that shift in opposite instructions inside of a aircraft. Spur gears are 1 of the more simple varieties of gears, as they never call for any specialty cuts or angles to function. As an alternative, spur gears use a intricate tooth form to determine in which the enamel will make contact. This in turn, will determine the amount of electrical power, torque, and velocity they can make.
A two-stage planetary equipment teach with spur gears is also attainable to operate at variable input speeds. For such a set up, a mathematical model of the equipment prepare is created. Simulation of the dynamic conduct highlights the non-stationary outcomes, and the outcomes are in great settlement with the experimental information. As the ratio of spur gears to spur gears is not consistent, it is referred to as a dedendum.
A planetary equipment prepare with spur gears is a variety of epicyclic gear teach. In this case, spur gears run amongst gears that incorporate each inner and external tooth. The circumferential movement of the spur gears is analogous to the rotation of planets in the solar technique. There are four primary factors of a planetary gear practice. The world equipment is positioned inside of the sunshine gear and rotates to transfer motion to the sunshine equipment. The planet gears are mounted on a joint provider that is connected to the output shaft.
Motor

planetary gear practice with helical gears

A planetary gear teach with helical teeth is an really strong transmission system that can offer large stages of energy density. Helical gears are utilised to increase performance by supplying a more effective different to standard worm gears. This kind of transmission has the likely to increase the general efficiency of a program, and its rewards lengthen much past the power density. But what can make this transmission system so desirable? What are the important factors to contemplate when planning this type of transmission technique?
The most simple planetary practice is composed of the sunshine gear, earth equipment, and ring gear factors. The quantity of planets varies, but the standard structure of planetary gears is equivalent. A basic planetary geartrain has the sunshine gear driving a provider assembly. The variety of planets can be as lower as two or as substantial as 6. A planetary gear train has a lower mass inertia and is compact and reliable.
The mesh stage houses of a planetary gear prepare are particularly crucial in creating the profiles. Various parameters this sort of as mesh section distinction and tooth profile modifications need to be examined in depth in buy to entirely comprehend the dynamic qualities of a PGT. These elements, together with other individuals, establish the helical gears’ functionality. It is consequently important to understand the mesh stage of a planetary gear practice to style it successfully.

China Custom Three Phase Asynchronous AC Induction Electric Gear Reducer Fan Blower Vacuum Air Compressor Water Pump CZPT Industry Machine Motor     near me factory China Custom Three Phase Asynchronous AC Induction Electric Gear Reducer Fan Blower Vacuum Air Compressor Water Pump CZPT Industry Machine Motor     near me factory